• SALIM MAHDAB Laboratoire de Recherche en Electrotechnique et en Automatique, Université de Medea
  • ABDELHAFID MOUALDIA Laboratoire de Recherche en Electrotechnique et en Automatique, Université de Medea


Hybrid energy system, Energy management system, State of charge


This article is a contribution to the implementation of a real-time energy management system (EMS) to maximize the efficiency of power distribution in an isolated hybrid system containing photovoltaic modules, a wind turbine and a battery energy storage system which is used as a backup source. However, hybridization of multiple sources requires power flow control. For this reason, in this work, an appropriate power management is developed using a fuzzy deterministic rule-based algorithm to control the proposed autonomous multi-source system. The developed EMS is tested and validated by an application of arc welding in isolated industrial sites located in a remote region of the Algerian Sahara.


(1) L. Barote, C. Marinescu, M.N. Cirstea, Control structure for single-phase stand-alone wind-based energy sources, IEEE Transactions on Industriel Electronics, 60, 2, pp. 764-772 (2013).

(2) N. Mendis, K.M. Muttaqi, S. Perera, Standalone operation of wind turbine-based variable speed generators with maximum power extraction capability, IEEE Transactions on Energy Conversion, 27, 4, pp. 882-834 (2012).

(3) T. Ackerman, Wind power in power systems, John Wiley & Sons (2005).

(4) C. Lumbreras, J.M. Guerrrero, P. Garcia, F. Briz, D.D. Reigosa, Control of small wind turbine in the high wind speed region, IEEE Transactions on Power Electronics, 31, 10, pp. 6980-6991 (2016).

(5) D. Sha, X. Liao, Control of switch-mode pulsed GMAW welding power, Energy Conversion Congress And Exposition, pp. 2746-2749 (2009).

(6) S. Narula, G. Bhuvaneswari, B.S Singh, A modular converter for welding power supply with improved power quality, International Conference on Power Electronics, Drives and Energy System (PEDES), pp. 1-4 (2012).

(7) J. Zhu, W. Liang, Y. Shi, Study on the dynamic process of arc welding inverter, Third International Power Electronics and Motion Control Conference, 1, pp. 308-311 (2000).

(8) A.C. Davies, The Science and Practice of Welding: Welding Science and Technology,10th Ed. Cambridge University Press, 1 (1992).

(9) Y.M. Chae, J.S. Gho, W.S. Shin, J.Y. Choi, PWM Converter-Inverter Arc Welding Machine Using New Type NCT, Annual IEEE Power Electronics Specialists Conference, Fukuoka, Japan, 2, pp.1636-1641, May (1998).

(10) A.K. Paul, Robust product design using SOSM for control shielded metal arc welding (SMAW), Proc. IEEE Transactions on Industrial Electronics, 63, 6, pp. 3717-3724 (2016).

(11) M. Pinard, Convertisseurs et Electronique de Puissance, Paris Dunod (2007).

(12) B. Boussiala, M.O. Mahmoudi, Nezli, Study and control of PWM arc welding based on microcontroller, 2nd International Conference on Computational and Experimental Science and Engineering (ICCESEN), Antalya, Turquie (2015).

(13) Z. Hassiba, L. Cherif, M. Ali, Optimal operation strategy of hybrid renewable energy system for rural electrification of a remote Algeria, Energy Procedia, 36, pp. 1060-1069 (2013).

(14) N.A. Schinas, N.A Vovos, G.B. Giannakopolus, An autonomous system supplied only by a pitch-controlled variable-speed wind turbine, IEEE Transactions on Energy Conversion, 22, 2, pp. 325-331 (2007).

(15) K. Tan, Islam, Optimum control strategy conversion of PMSG wind turbine system without mechanical sensors, IEEE Transactions on Energy Conversion, 19, 2, pp. 392-399 (2004).

(16) S. Diaf, G. Notton, Technical and economic analysis of large-scale wind energy conversion systems in Algeria, Renew. Sustain. Energy Rev., 19, pp. 37–51 (2013).

(17) R. Maouedja, A. Mammeria, M.D. Draoua, B. Benyoucef, Techno-economic analysis of a standalone hybrid photovoltaic-wind system. application in electrification of a house in Adrar region, Energy Procedia, 74, pp. 1192–1204 (2015).






Électrotechnique et électroénergétique / Electrical and Power Engineering