FLOW AND HEAT TRANSFER IN AN AGING HEAT FURNACE FOR ALUMINUM ALLOY PLATES
Keywords:
Ageing heat treatment, Heat furnace, Aluminum alloy plates, Numerical simulation, Finite element methodAbstract
Structural materials for the aerospace industry require high hardness and easy machining in certain tempers that, particularly, 2014 aluminum alloy may withstand successfully. The proper aging heat treatment from the aluminum raw plate, from the initial, hall temperature, all the way to the final product, which may take up to roughly 9 hours, is an important quality concern. An important role in understanding these thermal processes is played by mathematical modeling, which provides for the ability to simulate and optimize such processes at an industrial scale. Numerical modeling is used here to assist the optimization of the aging process. The results compare well with the available industrial tests data on an indirectly heated, fuel-fired batch furnace that is used to this end. This study is aimed to model the airflow inside the furnace during the aging process with a particular focus on predicting the dynamics of the internal thermal field distribution.
References
(1) A.P. Mouritz, Introduction to Aerospace Materials, Aluminum Alloys for Aircraft Structures, Woodhead Publishing, pp. 173-201, 2012.
(2) M. Belte, D. Dragulin, A.T.C. Aluvation, Importance of the cooling rate during the heat treatment process of aluminum, Int. Aluminium J., pp. 61-64, 2018.
(3) M. Popa et al., Coupled fluid flow and heat transfer analysis of aging heat furnace, Light Metals 2019, Springer International Publishing.
(4) J. Rohde, A. Jeppsson, Literature review of heat treatment simulations with respect to phase transformation, residual stresses, and distortion, Scand. J. Metall., 29, 2, pp. 47-62, 2010.
(5) Y. Veli, M. Petre, A.M. Morega, A.A. Dobre, A.V. Necola, Finite element method analysis of flow and heat transfer of aging heat furnace for aluminum alloy plates, INCAS Bull., 14, 1, 2022 (in press).
(6) J. Mackerle, Finite element analysis and simulation of quenching and other heat treatment processes: A bibliography (1976–2001), Computational Materials Science, 27, 3, pp. 313-332, 2003.
(7) R. Purushothaman, Evaluation, and Improvement of Heat Treatment Furnace Model, Ph.D. thesis, Worcester Polytechnic Institute, June 2008.
(8) E. Hachem, Stabilized finite element method for heat transfer and turbulent flows inside industrial furnaces, Mechanics [physics. med-ph]. École Nationale Supérieure des Mines de Paris, PhD thesis, 2009.
(9) D. Saber, H. M. Almalki, Kh. Abd El-Aziz, Design, and building of an automated heat-treatment system for industrial applications, Alexandria Engineering J., 59, 6, 2020, pp. 5007-5017, 2020.
(10) *** Pyrometry AMS2750F, AMS B Finishes Processes and Fluids Committee, SAE International, 2020-06-29.
(11) D. C. Wilcox, Turbulence Modeling for CFD, 2nd ed., DCW Industries, 1998.
(12) D. C. Wilcox, Formulation of the k–ω turbulence model revisited, AIAA J., 46, pp. 2823-2838, 2008.
(13) W. P. Jones, B. E. Launder, The prediction of laminarization with a two-equation model of turbulence, International J. of Heat and Mass Transfer, 15, pp. 301-314, 1972.
(14) B. E. Launder, B. I. Sharma, Application of the energy dissipation model of turbulence to the calculation of flow near a spinning disc, Letters in Heat and Mass Transfer, 1, 2, pp. 131-138, 1974.
(15) A. Bejan, Heat Transfer, Wiley India Edition, 2011.
(16) V. Kriventsev, H. Ohshima, A. Yamaguchi, H. Ninokata, Numerical prediction of secondary flows in complex areas using the concept of local turbulent Reynolds number, J. of Nuclear Science and Technology, 40, 9, pp. 655–663, 2003.
(17) W. Pfeninger, Transition Experiments in the Inlet Length of Tubes at High Reynolds Numbers, Boundary Layer and Flow Control, ed. G. V. Lachman, Pergamon, pp. 970–980, 1961.
