STUDII DE CÂMP ELECTROMAGNETIC ȘI TERMIC ÎN MOTOARE ELECTRICE REDUNDANTE

Autori

  • IOANA IONICA ICPE S.A. / Universitatea Politehnica din București, Şcoala Doctorală de Inginerie Electrică
  • MIRCEA MODREANU ICPE
  • ALEXANDRU M. MOREGA Polytechnic University of Bucharest, Faculty of Electrical Engineering / Doctoral School of Electrical Engineering, Romanian Academy
  • Ing. Cristian Boboc ICPE

Cuvinte cheie:

masini electrice speciale, motor de cuplu cu unghi limitat, camp electromagnetic, camp termic, analiza numerica

Rezumat

Această lucrare își propune analiza electromagnetică și termică pentru un motor de cuplu cu unghi limitat cu două canale, folosind modele numerice tri-dimensionale. Motorul de cuplu cu unghi limitat cu două canale pe care îl prezentăm în cadrul lucrării, spre deosebire de motorul de cuplu clasic, asigură rolul a două motoare de cuplu cu unghi limitat. Reprezintă o soluție destinată aplicațiilor pentru care performanțele funcționale ridicate, dimensiunile de gabarit, greutatea și siguranța în funcționare sunt critice. În proiectare se va folosi analiza numerică în vederea stabilirii unei soluții constructive optime din punct de vedere al tuturor cerințelor motorului stabilite în Specificația Tehnică.

Biografii autori

  • MIRCEA MODREANU, ICPE

    Mircea Modreanu

    Dr. ing. la ICPE, Departamentul de Masini Electrice Speciale si Sisteme de Comanda.

  • ALEXANDRU M. MOREGA, Polytechnic University of Bucharest, Faculty of Electrical Engineering / Doctoral School of Electrical Engineering, Romanian Academy

    Alexandru Mihail-Morega

    Prof. Dr. Ing. la Universitatea Politehnica din București, Facultatea de Inginerie Electrică si director al Şcoalii Doctorale de Inginerie Electrică, Universitatea Politehnica din București. Academician la Academia Romana.

  • Ing. Cristian Boboc, ICPE

    Cristian Boboc

    Director al Departamentului de Masini Electrice Speciale si Sisteme de Comanda in cadrul ICPE.

Referințe

(1) D. Stoia, Motoare de curent continuu excitate cu magneți permanenți, Editura Tehnică, București, 1983.

(2) ***AXYS Catalogue, brushless DC motors, 2002.

(3) ***Moog Catalogue, Direct drive brushless DC torque motors, 2013.

(4) ***Precilec Ctalogue, Permanent magnet generators and motors, 2013.

(5) ***Bental motion systems, brushless motors, 2013.

(6) ***Icpe catalogue, special electric machines, 2019.

(7) ***“Componente electromecanice pentru sisteme high tech direct drive realizate cu linii tehnologice flexibile – HTDD”, Raport tehnic, etapa 1.

(8) ***“Componente electromecanice pentru sisteme high tech direct drive realizate cu linii tehnologice flexibile ̶ HTDD”, Raport tehnic, etapa 2.

(9) P.R. Upadhyay, K.R. Rajagopal, B.P. Singh, Computer aided design of an axial-field permanent magnet brushless dc motor for an electric vehicle, Journal of Applied Physics, 93, 10, pp.8689,8691, 2003.

(10) P.R. Upadhyay, K.R. Rajagopal, FE Analysis and computer-aided design of a sandwiched axial-flux permanent magnet brushless DC motor, IEEE Transactions on Magnetics, 42, 10, pp.3401,3403, 2006.

(11) P.R. Upadhyay , K.R. Rajagopal, FE analysis and CAD of radial-flux surface mounted permanent magnet brushless DC motors, Digests of the IEEE International Magnetics Conference -INTERMAG Asia-, pp.729-730, 2005.

(12) R. Obreja, I.R. Edu, Limited Angle Torque Motors having high torque density, used in accurate Drive Systems, Acta Polytechnica,. 51, 5, pp.75-83, 2011.

(13) M.I. Andrei, N.M. Modreanu., Numeric Modelling of a Two-Channel Limited Angle Torque Motor, EEA ‒ Electrotehnică, Electronică, Automatică, Editura. ELECTRA, 62, 1, pp. 26-31, 2014.

(14) Andrei M.I., Modreanu M., Ghițulescu L., ACES methodology for a dc limited angle torque motor, Revue roumaine des sciences techniques, Série Électrotechnique et Énergétique. 2019

(15) ***Comsol Multiphysics documentation: http://www.comsol.com/

(16) M.I. Andrei, N.M. Modreanu, M. Gutu, L. Ghitulescu, Sistem de masură asistat de calculator pentru caracterizarea motoarelor de cuplu cu unghi limitat, EEA – Electrotehnică, Electronică, Automatică, Editura. ELECTRA, 62, 3, pp. 11-17, 2014.

(17) Boglietti, A. Cavagnino, D.A. Staton, thermal analysis of TEFC induction motors, Proc. of IEEE International Conference PEDS, Singapore, 2003.

(18) Boglietti, A. Cavagnino, M. Lazzari, M. Pastorelli, A simplified thermal model for variable-speed self-cooled industrial induction motor, IEEE Transactions on Industry Application,, 39, 4, pp. 945 – 952, 2003.

(19) Cassat, C. Espanet, N. Wavre, BLDC motor stator and rotor iron losses and thermal behavior based on lumped schemes and 3-D FEM analysis, IEEE Transactions on Industry Application, 39, 5, pp. 1314 – 1322, 2003.

(20) E. Lebenhaft, Field evaluation of slip-dependent thermal model for motors with high-inertia starting, Petroleum and Chemical Industry Technical Conference,. PCIC '07, pp. 1 – 5, 2007.

(21) H.P. Liu, V. Lelos, C.S. Hearn, Transient 3-D thermal analysis for an air-cooled induction motor, Proc. of IEEE International Conference (IEMDC) , pp. 417 – 420, 2005.

(22) R. Bernard, R. Glises, D. Chamagne, 3D thermal study of a low power electric motor with Flux3D, Flux-Magazine, 37, pp. 10 – 11, 2001.

(23) A.M. Morega, J.C. Ordonez, J.V.C. Vargas, S. Kosaraju, A finite element method analysis and optimization of a polymer electrolyte membrane fuel cell with interdigitated flow field design, International Journal of Energy Technologies and Policy (IJETP), Special Issue: Computational Fluid Dynamics Simulations in Energy Technologies and Processes, pp. 112-123, 2008.

Descărcări

Publicat

09.03.2023

Număr

Secțiune

MASINI ELECTRICE

Cum cităm

STUDII DE CÂMP ELECTROMAGNETIC ȘI TERMIC ÎN MOTOARE ELECTRICE REDUNDANTE. (2023). ACTUALITĂŢI ŞI PERSPECTIVE ÎN DOMENIUL MAŞINILOR ELECTRICE, 18(1), 36-45. https://journal.iem.pub.ro/apme/article/view/360