A WIRELESS POWER TRANSFER SYSTEM DESIGN USING TRANSMITTER LARGER THAN RECEIVER FOR MOBİLE PHONES

Authors

  • ALI AĞÇAL Suleyman Demirel University, Electrical and Electronics Engineering Department, Isparta Author
  • OĞUZHAN VURAL Suleyman Demirel University, Electrical and Electronics Engineering Department, Isparta Author

Keywords:

Wireless power transfer, Magnetic resonance coupling, Mobile phone, Efficiency, Coupling factor

Abstract

In a world where technology grows rapidly, electrical energy is of vital importance. In the recent future, the wireless transmission of electrical energy is expected to play a vital role in our lives. This paper investigated a Wireless Power Transfer (WPT) system with a transmitter size larger than the receiver size. Magnetic resonance coupling was used as the WPT system. Wireless charging of mobile phones was realized with a large transmitter coil and a small receiver coil placed on the back of the mobile phone. In this study, the WPT system was designed for a frequency of 1 MHz and a power of 5 W. As a result of the calculations and simulations made for the WPT system, an efficiency of 97 % was obtained in a 10 mm air gap. Analyzes were made according to the different receiver and transmitter coil sizes and air gaps. The optimal coil size has been determined. Air gap and misalignment limits are determined for optimal coil size. The analytical calculations and modeling of the design are made for the best efficiency and the most suitable receiver and transmitter coil design in Serial-Series (SS) topology. Wireless phone charging design was carried out using various programs. In addition, the effects of the design on human health were examined.

References

(1) N. Tesla, Art of Transmitting Electrical Energy through Natural Mediums, U.S. Patent No. 787,412 (1905).

(2) M. Ishiba, J. Ishida, K. Komurasaki, Y. Arakawa, Wireless power transmission using modulated microwave, IEEE MTT-S International Microwave Workshop Series on Innovative Wireless Power Transmission: Tech., Sys., and App., pp. 51-54 (2011).

(3) K.J. Duncan, Laser based power transmission: Component selection and laser hazard analysis, IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer, pp. 100-103 (2016).

(4) P.C. Ghosh, P.K. Sadhu, S. Das, A Hıgh-Performance Z-Source Resonant Inverter for Contactless Power Transfer, Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 62, 3, pp. 282–287 (2017).

(5) E. Abramov, M.M. Peretz, Multi-loop control for power transfer regulation in capacitive wireless systems by means of variable matching networks, IEEE Journal of Emerging and Selected Topics in Power Electronics, 8, 3, pp. 2095-2110 (2020).

(6) M. Budhia, G.A. Covic, J.T. Boys, Design and Optimization of Circular Magnetic Structures for Lumped Inductive Power Transfer Systems, IEEE Transactions on Power Electronics, 26, 11, pp. 3096-3108 (2011).

(7) T. Imura, Y. Hori, Maximizing Air Gap and Efficiency of Magnetic Resonant Coupling for Wireless Power Transfer Using Equivalent Circuit and Neumann Formula, IEEE Transactions on Industrial Electronics, 58, 10, pp. 4746-4752 (2011).

(8) M. Stanculescu, M. Iordache, D. Nıculae, L. Bobaru, V. Bucată, Algorithm for computing s parameters and their use for studying efficiency of electromagnetic energy wireless transfer systems, Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 63, 2, pp. 138–144 (2018).

(9) N. Bekiroglu, A. Ağçal, S. Ozcira, Validation of wireless power transfer by using a 3D representation of magnetically coupled resonators considering peak efficiency, J. of Magnetıcs, 23, 1, pp.11-17, (2018).

(10) G. Zulauf, J.M. Rivas-Davila, Single-Turn Air-Core Coils for High-Frequency Inductive Wireless Power Transfer, IEEE Transactions on Power Electronics, 35, 3, pp. 2917-2932 (2020).

(11) Y. Zhang, S. Chen, X. Li, Z. She, F. Zhang, Y. Tang, Coil Comparison and Downscaling Principles of Inductive Wireless Power Transfer Systems, IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW), pp. 116-122 (2020).

(12) E. Aydin, M.T. Aydemir, A 1-kW wireless power transfer system for electric vehicle charging with hexagonal flat spiral coil, Turkish Journal of Electrical Engineering and Computer Sciences, 29, 5, pp. 2346-2361 (2021).

(13) Z. Luo, X. Wei, Analysis of square and circular planar spiral coils in wireless power transfer system for electric vehicles. IEEE Transactions on Industrial Electronics, 65, 1, pp. 331-341 (2017).

(14) K. Song, G. Yang, Y. Guo, Y. Lan, S. Dong, J. Jiang, C. Zhu, Design of DD coil with high misalignment tolerance and low EMF emissions for wireless electric vehicle charging systems. IEEE Transactions on Power Electronics, 35, 9, pp. 9034-9045 (2020).

(15) A. Agcal, S. Ozcira, K. Toraman, Comparison of compensating topologies in two coils resonant wireless power transfer system, Journal of Engineering Research, online first article (2022).

(16) H.A. Wheeler, Simple Inductance Formulas for Radio Coils, in Proceedings of the Institute of Radio Engineers, 16, 10, pp. 1398-1400 (1928).

(17) ***IEEE Standard for safety levels with respect to human exposure to electric, magnetic, and electromagnetic fields, 0 Hz to 300 GHz, IEEE Std C95.1-2019, 4, pp. 1-312 (2019).

(18) ***Guidelines for limiting exposure to electromagnetic fields (100 kHz to 300 GHz), Health Physics, ICNIRP, 118, 5, pp. 483-524 (2020).

(19) J. Lu, G. Zhu, C.C. Mi, “Foreign Object Detection in Wireless Power Transfer Systems”, in IEEE Trans. on Industry Applications, 58, 1, pp. 1340-1354 (2022).

Downloads

Published

30.09.2022

Issue

Section

Génie biomédical | Biomedical Engineering

How to Cite

A WIRELESS POWER TRANSFER SYSTEM DESIGN USING TRANSMITTER LARGER THAN RECEIVER FOR MOBİLE PHONES. (2022). REVUE ROUMAINE DES SCIENCES TECHNIQUES — SÉRIE ÉLECTROTECHNIQUE ET ÉNERGÉTIQUE, 67(3), 359-365. https://journal.iem.pub.ro/rrst-ee/article/view/190