MAGNETIC ANALYSIS OF ROTATING MAGNETIC FIELD DEVICES USED FOR STUDIES ON BLOOD CELLS

Authors

  • VALENTIN IONIŢĂ Faculty of Electric Engineering, National University of Science and Technology POLITEHNICA Bucharest, Romania. Author
  • MIHAI REBICAN Faculty of Electric Engineering, National University of Science and Technology POLITEHNICA Bucharest, Romania. Author
  • LUCIAN PETRESCU Faculty of Electric Engineering, National University of Science and Technology POLITEHNICA Bucharest, Romania. Author

DOI:

https://doi.org/10.59277/RRST-EE.2026.1.27

Keywords:

Electrical engineering computing, Magnetic analysis, Magnetic cores, Rotating magnetic field, Biological cells

Abstract

The study of the molecular-level effects in blood cells of the variable magnetic field requires the design of appropriate magnetic devices. In this article, four immobile configurations are analyzed: Helmholtz coils, Gramme coils, a 4-pole electromagnet, and a 6-pole electromagnet. These devices can create a rotating magnetic flux density, intense (up to hundreds of mT), of high frequency (up to 1 MHz) and with an appropriate degree of inhomogeneity (maximum 5 %) in the bioreactor area of 1 cm in diameter. The rotating field is created by supplying the component coils with currents having shifted phases. The original comparative numerical analysis with the help of COMSOL software highlighted the effect of the device geometry, the type of core and conductor, correlated with the working frequency, on the magnetic flux density level in the blood cells. Original and useful results were extracted from the analysis of the homogeneity of the magnetic field in the bioreactor domain.

References

(1) M. Tota, L. Jonderko, J. Witek, V. Novickij, J. Kulbacka, Cellular and molecular effects of magnetic fields, International Journal of Molecular Sciences, 25, 16, 8973 (2024).

(2) S. Prawanta, P. Sunwong, B. Boonwanna, V. Sooksrimuang, A. Kwankasem, S. Pongampai, P. Sudmuang, P. Klysubun, Design and construction of sextupole magnet prototype for Siam Photon Source II, 10th International Particle Accelerator Conference (IPAC 2019), Melbourne, Australia, pp. 4285–4297 (2019).

(3) A. Skumiel, J. Musiał, The use of Gramme coils in a 2-phase system for generation of a high frequency rotating magnetic field, Journal of Magnetism and Magnetic Materials, 564, 170198 (2022).

(4) N. Hallali, T. Rocacher, C. Crouzet, J. Béard, T. Douard, A. Khalfaoui, Low-frequency rotating and alternating magnetic field generators for biological applications: design details of home-made setups, Journal of Magnetism and Magnetic Materials, 564, 170093 (2022).

(5) A. Skumiel, Generation of a rotating high-frequency magnetic field designed for use in magnetic hyperthermia, Journal of Magnetism and Magnetic Materials, 553, 169294 (2022).

(6) R.M. Wojciechowski, A. Skumiel, M. Kurzawa, A. Demenko, Design, application and investigation of the system for generation of fast changing, rotating magnetic field causing hyperthermic effect in magnetic liquids, Measurement, 194, 111020 (2022).

(7) H. Ding, Z. Zhao, C. Jiang, Y. Xu, T. Ding, X. Fang, T. Ren, L. Li, Y. Pan, T. Peng, Construction and test of three-coil magnet power supply system for a high-pulsed magnetic field, IEEE Transactions on Applied Superconductivity, 28, 3, 5000606 (2018).

(8) J.R. Michel, S.B. Betts, J.D. Lucero, A. Bhardwaj, L.N. Nguyen, D.N. Nguyen, Design and construction of the new 85 T duplex magnet at NHMFL–Los Alamos, IEEE Transactions on Applied Superconductivity, 34, 5, 4900305 (2024).

(9) Y. Song, Z. Cheng, X. Jiang, J. Li, L. Li, Q. Wang, Design, test, and shimming of a 1.5 T head-only MRI superconducting magnet, IEEE Transactions on Applied Superconductivity, 35, 6, 3800505 (2025).

(10) I. Dobrin, D. Enache, G. Dumitru, M. Gutu, S. Zamfir, R. Pintea, Curved dipolar electromagnet, numerical modeling and design, Rev. Roum. Sci. Techn. – Électrotechn. et Énerg., 67, 4, pp. 409–415 (2022).

(11) Y. Lu, Y. Yang, M. Zhang, R. Wang, L. Jiang, B. Qin, Improved square-coil configurations for homogeneous magnetic field generation, IEEE Transactions on Industrial Electronics, 69, 6, pp. 6350–6360 (2022).

(12) Z. Ding, Z. Huang, M. Pang, G. Bai, Q. Wang, B. Han, Optimized design of uniform-field coils system with a large uniform region by particle swarm optimization algorithm, Measurement, 234, 114614 (2024).

(13) X. Zhu, C. Liu, H. Su, Y. Miao, H. Cheng, Design of improved four-coil structure with high uniformity and effective coverage rate, Heliyon, 9, 4, e15193 (2023).

(14) O. Sucre, S. Glöggler, Optimization method based on zonal harmonics for axially symmetric magnets, IEEE Transactions on Magnetics, 61, 2, 5100109 (2025).

(15) T.J. Havens, T. Duby, J. Huang, VRMS homogeneity definition: a proposal, Proceedings of the International Society for Magnetic Resonance in Medicine, Scientific Meeting and Exhibition (2002).

(16) V. Zablotskii, T. Polyakova, A. Dejneka, Effects of high magnetic fields on the diffusion of biologically active molecules, Cells, 11, 1, 81 (2021).

(17) C.M. Ciocazeanu, D.E. Nitescu, M. Morega, Useful assumption for simplified numerical analysis of transcranial magnetic stimulation, Rev. Roum. Sci. Techn. – Électrotechn. et Énerg., 70, 3, pp. 427–432 (2025).

(18) L. Petrescu, V. Ionita, M. Rebican, M.C. Petrescu, Optimization of quadrupole core for homogenous magnetic field using non-oriented silicon-iron materials, U.P.B. Scientific Bulletin, Series C, 87, 4 (2025).

(19) ***COMSOL, COMSOL Multiphysics® modeling software.

(20) A. Bermudez, D. Gomez, P. Salgado, Eddy-current losses in laminated cores and the computation of an equivalent conductivity, IEEE Transactions on Magnetics, 44, 12, pp. 4730–4738 (2008).

(21) F. Saftoiu, Y. Veli, A.M. Morega, Electropermeabilization for organic material – numerical modeling, Rev. Roum. Sci. Techn. – Électrotechn. et Énerg., 70, 4, pp. 603–608 (2025).

Downloads

Published

08.03.2026

Issue

Section

Génie biomédical | Biomedical Engineering

How to Cite

MAGNETIC ANALYSIS OF ROTATING MAGNETIC FIELD DEVICES USED FOR STUDIES ON BLOOD CELLS. (2026). REVUE ROUMAINE DES SCIENCES TECHNIQUES — SÉRIE ÉLECTROTECHNIQUE ET ÉNERGÉTIQUE, 71(1), 163-168. https://doi.org/10.59277/RRST-EE.2026.1.27