A DECOUPLED MAGNETIC INTEGRATION TECHNIQUE FOR DUAL-FREQUENCY TOPOLOGIES
DOI:
https://doi.org/10.59277/RRST-EE.2024.2.6Keywords:
Dual frequency dc/dc converter, Magnetic integration, Power density, Three-section winding, Finite element simulationAbstract
The dual-frequency converter comprises a high-frequency buck unit and a low-frequency buck unit, which has the advantages of high efficiency and fast dynamic response. But also, the increase of magnetic parts leads to the power density of the converter being greatly reduced; for this problem, this paper proposes a three-section winding method to decouple the two inductors in the converter integrated into a magnetic core, given the integrated magnetic parts structure and establish its gyrator-capacitor model to derive the decoupling conditions. The flux density distribution of the magnetic components is analyzed by finite element simulation software and compared with the existing integration method; this decoupling integration method can make the flux distribution more uniform and improve the core utilization. The results show that the volume and weight are reduced by 31.2 % and 25.3 % compared with those of the separated magnetic parts, and the efficiency is also consistent with that of the separated magnetic parts, which verifies the correctness and feasibility of the theoretical analysis.
References
(1) G. Hua, F.C. Lee, Soft-switching techniques in PWM converters, IEEE Transactions on Industrial Electronics, 42, 6, pp. 595–603 (1995).
(2) X.G. Yang, D.X. Wang, Z. Jia, Load and input voltage adaptive zero-voltage soft-switching full-bridge converter, Trans. China Electrotech., 37,12, pp. 3061–3072 (2022).
(3) S.A.Q. Mohammed, J.W. Jung, A state-of-the-art review on soft-switching techniques for dc-dc, dc-ac, ac-dc, ac-ac power converters, IEEE Transactions on Industrial Informatics, 17, 10, pp. 6569–6582 (2021).
(4) C. Fei, F.C. Lee, Q. Li, High-Efficiency High-Power-Density LLC Converter with an Integrated Planar Matrix Transformer for High-Output Current Applications, IEEE Transactions on Industrial Electronics, 64, 11, pp. 9072–9082 (2017).
(5) L.W. Zhou, X. Du, Z.H. Fu, Dual frequency buck converter, Proc. CESS, 26, 6, pp. 68–72 (2006).
(6) X. Du, L.W. Zhou, Q.M. Luo, Effect of dual frequency buck converter parameters on system performance, Trans. China Electrotech., 20, 11, pp. 49–55 (2005).
(7) Q.M. Luo, L.W. Zhou, W.G. Luo, Performance analysis and design of dual frequency Buck converter, Trans. China Electrotech., 23, 5, pp. 56–61 (2008).
(8) Q.M. Luo, L.W. Zhou, W.G. Luo, Operating mode of dual frequency buck converter, Trans. China Electrotech., 23, 11, pp. 72-78 (2008).
(9) Q.M. Luo, L.W. Zhou, W.G. Luo, Composite dual frequency buck converter, Proc. CESS, 28, 9, pp. 1–6 (2008).
(10) X. Du, L. Zhou, H.M. Tai, Dual frequency Buck converter, IEEE Transactions on Industrial Electronics, 56, 5, pp. 1690-1698 (2009).
(11) K. Fang, L. Zhou, Q. Liu, A review of dual frequency transformation theory in converters, Power System Technology, 34, 11, pp.135–139 (2010).
(12) Q.H. Chen, X.B. Ruan, Y.G. Yan, Magnetic integration technology and its application in switching power supplies, Trans., China Electrotech., 19, 3, pp. 1–18 (2004)
(13) H. Zhu, D. Zhang, Y. Zhou, Integrated magnetic buck-boost converter with ”zero” output current ripple, IEEE Transactions on Industrial Electronics, 68, 7, pp. 5821–5832 (2021).
(14) H.Z. Li, F.Y. Liu, Y. Liu, A new magnetically integrated high-gain coupled inductor multiplier boost converter, Trans. China Electrotech., 32, S2, pp. 450–460 (2020).
(15) X.F. Zhamg, L.W. Zhou, Q.W. Luo, Magnetically integrated dual-band dc-dc converters, Trans. China Electrotech., 25, 1, pp.77–83 (2010).
(16) S.W. Gao, Z.Y. Zhao, Magnetic integrated LLC resonant converter based on independent inductance winding, IEEE Access, 9, pp.660–672 (2021).
(17) Y. Liang, B. Lehman, A capacitor modeling method for integrated magnetic components in dc/dc converters, IEEE Transactions on Power Electronics, 20, 5, pp. 987–996 (2005).
(18) J.M. Zhou, X.K. Zhao, Theory and design of magnetic component of switching power supply, Bei Hang University Press (2014).
(19) Z. Yan, Z. Weibo, T. Guanghui, A core loss calculation method for dc/dc power converters based on sinusoidal losses, IEEE Transactions on Industrial Electronics, 38, 1, pp. 692–702 (2022).
Downloads
Published
Issue
Section
License
Copyright (c) 2024 REVUE ROUMAINE DES SCIENCES TECHNIQUES — SÉRIE ÉLECTROTECHNIQUE ET ÉNERGÉTIQUE
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
