RAYONNEMENT D'UNE FENTE DANS LES SYSTÈMES NUMÉRIQUES HAUT DÉBIT

Auteurs

  • MIRCEA NICOLAESCU Département des télécommunications Université Politehnica Author
  • VICTOR CROITORU Département des télécommunications Université Politehnica Author
  • LEONTIN TUȚĂ Département des communications et des technologies de l'information, Académie technique militaire "Ferdinand I" Author

Mots-clés :

Radiation, fente, Compatibilité électromagnétique

Résumé

La miniaturisation des systèmes électroniques numériques, l'augmentation de la fréquence et la diminution du niveau de puissance font des problèmes de compatibilité électromagnétique un domaine très important dans le processus de conception de l'électronique numérique. Les cartes de circuits imprimés (PCB) et le boîtier des systèmes numériques contiennent des fentes de différentes dimensions pour les connecteurs et pour les cartes d'extension. S'ils sont excités par des courants (par exemple par des courants communs), ou par des distributions de champ, ils rayonneront de l'énergie électromagnétique dans l'environnement en produisant des interférences électromagnétiques. L'article étudie le champ électromagnétique rayonné par une fente découpée dans une surface conductrice dans la gamme de fréquences de 1 à 40 GHz

Références

(1) I. Plotog, G. Vărzaru, C. Turcu, T. Cucu, P. Svasta, N. Codreanu, EMC requirements for DFM multicriterial approach, Rev. Roum. Sci. Techn. – Électrotechn. et Énerg., 53, Suppl., pp. 155–165 (2008).

(2) H.B. Bakoglu, Circuits, Interconnections, and Packaging for VLSI, Addison Wesley: Upper Saddle River, NJ, 1990.

(3) Y. Fu, T. Hubing, Analysis of radiated emissions from a printed circuit board using expert system algorithms, IEEE Transactions on Electromagnetic Compatibility, 49, 1, pp. 68-75 (2007).

(4) G. Cerri, R.De Leo, V.M. Primiani, Theoretical and experimental evaluation of the electromagnetic radiation from apertures in shielded enclosures, IEEE Transactions on Electromagnetic Compatibility, 34, 4 pp. 432-433 (1992).

(5) L. Buzinu, L. Anton, D. Deparateanu, M. Nicolaescu, Analysis of an array of rectangular apertures based on the active parameters of its infinite extension, 12th Intern. Conf. on Comm., Bucharest (2018).

(6) J. D. Kraus, Antennas and Wave Propagation, Mc Graw-Hill, Inc, U.S.A., 2017.

(7) C. Poschalkoand S. Selberherr, Calculation of the radiation from the slot of a slim enclosure with a cavity resonator model, Asia-Pacific Symposium on Electromagnetic Compatibility and 19th Int. Zurich Symposium on Electromagnetic Compatibility.

(8) M. Li, J. Nuebel, J.L. Drewniak, R.E. DuBroff, T.H. Hubing, T.P. Van Doren, EMI from cavity modes of shielding enclosures—FDTD modeling and measurements, IEEE Transactions on Electromagnetic Compatibility, 42, 1, pp. 29-38 (2000).

Téléchargements

Publiée

2022-09-30

Numéro

Rubrique

Électronique et transmission de l’information | Electronics & Information Technology

Comment citer

RAYONNEMENT D’UNE FENTE DANS LES SYSTÈMES NUMÉRIQUES HAUT DÉBIT. (2022). REVUE ROUMAINE DES SCIENCES TECHNIQUES — SÉRIE ÉLECTROTECHNIQUE ET ÉNERGÉTIQUE, 67(3), 327-330. https://journal.iem.pub.ro/rrst-ee/article/view/180