EXPERIMENTAL INVESTIGATION OF MELTING PROCESS

Authors

  • DIHIA DJEFEL Department of Mechanics, LMSE Laboratory, Faculty of Construction Engineering, Mouloud Mammeri University of Tizi Ouzou, BP Box 17 RP 15000, Tizi Ouzou, Algeria. Author
  • SAID MAKHLOUF Department of Mechanics, LMSE Laboratory, Faculty of Construction Engineering, Mouloud Mammeri University of Tizi Ouzou, BP Box 17 RP 15000, Tizi Ouzou, Algeria. Author

DOI:

https://doi.org/10.59277/RRST-EE.2026.4.15

Keywords:

Heat energy storage, Heat exchanger, Phase change materials, Melting process

Abstract

This paper presents an experimental study of the melting characteristics of a PCM rectangular thermal storage system. The LHESS is composed of a shell and tubes with circulating heat transfer fluid (HTF; water in this study). Stearic acid is used as the PCM and placed in the space between the shell and tubes. The melting process of the phase change material is investigated with flow rate and inlet temperature parameters. According to the experimental results, as the inlet temperature was increased by 65°C, 75°C, and 80°C, the melting time was 51%, 64.46%, and 73.28%, respectively, for a fluid flow rate of 4.61 l/min. Moreover, the results showed that the effect of HTF flow on the thermal energy storage (TES) is 9%, 10%, and 15% for the flow rates of 4.61 l/min, 4.61 l/min, and 1 l. / min, respectively.

References

(1) H.K. Badaka, D.M. Kongnine, A.M. Morega, ”Heat recovery during biomass pyrolysis provided with a thermoelectric metal plate-based system,” Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 70, 3, pp. 409–414 (2025).

(2) F. Saftoiu, A.M. Morega, ”Cooling system for photovoltaic panels,” Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 67, 1, pp. 343–348 (2022).

(3) E. Douvi, et al., ”Phase change materials in solar domestic hot water systems: a review,” International Journal of Thermofluids, 10, article 100075 (2021).

(4) M. Irfan Lone, R. Jilte, ”A review on phase change materials for different applications,” Materials Today: Proceedings, 46, pp. 10980–10986 (2021).

(5) F. Agyenim, N. Hewitt, P. Eames, M. Smyth, ”A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS),” Renewable and Sustainable Energy Reviews, 14, 2, pp. 615–628 (2010).

(6) L. Kalapala, J.K. Devanuri, ”Influence of operational and design parameters on the performance of a PCM-based heat exchanger for thermal energy storage – a review,” Journal of Energy Storage, 20, pp. 497–519 (2018).

(7) A. Sharma, D. Buddhi, ”Effect of thermophysical properties of the PCM and heat exchanger material on the performance of a latent heat storage system,” International Journal of Solar Energy, 24, pp. 99–105 (2005).

(8) A.T. Muzhanje, H. Hassan, ”Heat transfer characteristics of charging and discharging encapsulated PCMs (SP24, SP26 & SP29) for free cooling: impact of geometry and nanomaterials addition,” J Therm Anal Calorim, 148, 19, pp. 9919–9936 (2023).

(9) F. Agyenim, P. Eames, M. Smyth, ”Experimental study on the melting and solidification behavior of a medium temperature phase change storage material (erythritol) system augmented with fins to power a LiBr/H2O absorption cooling system,” Renew. Energy, 36, 1, pp. 108–117 (2011).

(10) A. Hosseini, M. Rahimi, R. Bahrampoury, ”Experimental and computational evolution of a shell and tube heat exchanger as a PCM thermal storage system,” Int. Commun. Heat Mass Transf., 50, pp. 128–136 (2014).

(11) M. Rahimi, A.A. Ranjbar, D.D. Ganji, K. Sedighi, M.J. Hosseini, R. Bahrampoury, “Analysis of geometrical and operational parameters of PCM in a fin and tube heat exchanger,” International Communications in Heat and Mass Transfer, 53, pp. 109–115 (2014).

(12) A.A. Al Abidi, S. Mat, K. Sopian, M.Y. Sulaiman, C.H. Lim, ”Numerical study of melting and solidification of PCM in a triplex tube heat exchanger with and without fins,” Applied Thermal Engineering, 36, pp. 173–182 (2012).

(13) N.A. Hindi, S.F. Dakhil, K.A. Abbas, ”Experimental study to improve solar photovoltaic performance by utilizing PCM and finned wall,” Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 102, 1, article 1 (2023).

(14) J. Jaguemont, N. Omar, P. Van den Bossche, J. Mierlo, ”Phase change materials (PCM) for automotive applications: a review,” Applied Thermal Engineering, 132, pp. 308–320 (2018).

(15) "Yaws’ handbook of thermodynamic and physical properties of chemical compounds,” Knovel, online resource (accessed Jan. 10, 2019), https://app.knovel.com/

Downloads

Published

20.11.2026

Issue

Section

Thermotechnique et thermoénergétique | Thermotechnics and Thermal Energy

How to Cite

DJEFEL, D., & MAKHLOUF, S. (2026). EXPERIMENTAL INVESTIGATION OF MELTING PROCESS. REVUE ROUMAINE DES SCIENCES TECHNIQUES — SÉRIE ÉLECTROTECHNIQUE ET ÉNERGÉTIQUE, 71(4), 567-572. https://doi.org/10.59277/RRST-EE.2026.4.15