ÉTUDE EXPÉRIMENTALE DU PROCÉDÉ DE FUSION
DOI :
https://doi.org/10.59277/RRST-EE.2026.4.15Mots-clés :
Stockage d'énergie thermique, Échangeur de chaleur, Matériaux à changement de phase, Procédé de fusionRésumé
Cet article présente une étude expérimentale des caractéristiques de fusion d'un système de stockage thermique rectangulaire à base de matériau à changement de phase (MCP). Le système LHESS est composé d'une calandre et de tubes, dans lesquels circule un fluide caloporteur (de l'eau dans cette étude). L'acide stéarique est utilisé comme MCP et placé entre la calandre et les tubes. Le processus de fusion du MCP est étudié en fonction du débit et de la température d'entrée. D'après les résultats expérimentaux, pour un débit de fluide de 4,61 l/min, le temps de fusion est respectivement de 51 %, 64,46 % et 73,28 % lorsque la température d'entrée passe de 65 °C à 80 °C. De plus, les résultats montrent que l'influence du débit du fluide caloporteur sur le stockage d'énergie thermique (SET) est de 9 %, 10 % et 15 % pour des débits de 4,61 l/min, 4,61 l/min et 1 l/min, respectivement.
Références
(1) H.K. Badaka, D.M. Kongnine, A.M. Morega, ”Heat recovery during biomass pyrolysis provided with a thermoelectric metal plate-based system,” Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 70, 3, pp. 409–414 (2025).
(2) F. Saftoiu, A.M. Morega, ”Cooling system for photovoltaic panels,” Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 67, 1, pp. 343–348 (2022).
(3) E. Douvi, et al., ”Phase change materials in solar domestic hot water systems: a review,” International Journal of Thermofluids, 10, article 100075 (2021).
(4) M. Irfan Lone, R. Jilte, ”A review on phase change materials for different applications,” Materials Today: Proceedings, 46, pp. 10980–10986 (2021).
(5) F. Agyenim, N. Hewitt, P. Eames, M. Smyth, ”A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS),” Renewable and Sustainable Energy Reviews, 14, 2, pp. 615–628 (2010).
(6) L. Kalapala, J.K. Devanuri, ”Influence of operational and design parameters on the performance of a PCM-based heat exchanger for thermal energy storage – a review,” Journal of Energy Storage, 20, pp. 497–519 (2018).
(7) A. Sharma, D. Buddhi, ”Effect of thermophysical properties of the PCM and heat exchanger material on the performance of a latent heat storage system,” International Journal of Solar Energy, 24, pp. 99–105 (2005).
(8) A.T. Muzhanje, H. Hassan, ”Heat transfer characteristics of charging and discharging encapsulated PCMs (SP24, SP26 & SP29) for free cooling: impact of geometry and nanomaterials addition,” J Therm Anal Calorim, 148, 19, pp. 9919–9936 (2023).
(9) F. Agyenim, P. Eames, M. Smyth, ”Experimental study on the melting and solidification behavior of a medium temperature phase change storage material (erythritol) system augmented with fins to power a LiBr/H2O absorption cooling system,” Renew. Energy, 36, 1, pp. 108–117 (2011).
(10) A. Hosseini, M. Rahimi, R. Bahrampoury, ”Experimental and computational evolution of a shell and tube heat exchanger as a PCM thermal storage system,” Int. Commun. Heat Mass Transf., 50, pp. 128–136 (2014).
(11) M. Rahimi, A.A. Ranjbar, D.D. Ganji, K. Sedighi, M.J. Hosseini, R. Bahrampoury, “Analysis of geometrical and operational parameters of PCM in a fin and tube heat exchanger,” International Communications in Heat and Mass Transfer, 53, pp. 109–115 (2014).
(12) A.A. Al Abidi, S. Mat, K. Sopian, M.Y. Sulaiman, C.H. Lim, ”Numerical study of melting and solidification of PCM in a triplex tube heat exchanger with and without fins,” Applied Thermal Engineering, 36, pp. 173–182 (2012).
(13) N.A. Hindi, S.F. Dakhil, K.A. Abbas, ”Experimental study to improve solar photovoltaic performance by utilizing PCM and finned wall,” Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 102, 1, article 1 (2023).
(14) J. Jaguemont, N. Omar, P. Van den Bossche, J. Mierlo, ”Phase change materials (PCM) for automotive applications: a review,” Applied Thermal Engineering, 132, pp. 308–320 (2018).
(15) "Yaws’ handbook of thermodynamic and physical properties of chemical compounds,” Knovel, online resource (accessed Jan. 10, 2019), https://app.knovel.com/
Téléchargements
Publiée
Numéro
Rubrique
Licence
Certains droits réservés 2026 REVUE ROUMAINE DES SCIENCES TECHNIQUES — SÉRIE ÉLECTROTECHNIQUE ET ÉNERGÉTIQUE

Ce travail est disponible sous licence Creative Commons Attribution - Pas d'Utilisation Commerciale - Pas de Modification 4.0 International.