DESIGN OF AN HTS SUPERCONDUCTING ELECTROMAGNET INTENSE AND UNIFORM MAGNETIC FIELD GENERATOR
DOI:
https://doi.org/10.36801/Keywords:
Superconductive, intense magnetic field, CryogenicsAbstract
The paper presents the important elements for the design of an HTS superconducting electromagnet, generator of an intense magnetic field (5T) and of high uniformity (<1%). To establish its geometric and functional parameters, the value of the induction of the generated magnetic field and the uniformity in its central area were taken into consideration. Numerical modeling of the generated magnetic field was performed in Comsol Multiphysics. The characteristics of the YBCO type HTS superconducting material were also taken into account. The coils will be made in the form of double buckets of superconducting tape, the chosen configuration being Helmholtz type. In this way, the central magnetic field area of the electromagnet is accessible for applications from two directions: vertical and horizontal.
References
(1) ***Theva, https://www.theva.de/wp-content/uploads/2021/05/210412_Flyer_Supraleiter_A5_THEVA_small.pdf.
(2) ***Amsc https://www.amsc.com/gridtec/amperium-hts-wire/. .
(3) ***Superpower Inc,: https://www.superpower-inc.com/specification.aspx.
(4) A.W. Zimmermann, S.M. Sharkh, Design of a 1 MJ/100 kW high temperature superconducting magnet for energy storage, Faculty of Engineering and Physical Sciences, University of Southampton, Highfield Campus, Southampton, SO17 1BJ, UK, 2020.
(5) Y. Iwasa, Case studies in superconducting magnets: design and operational issues, Springer Science + Business Media, LLC 2009.
(6) D. C. V. F. Design and construction of a 3D Helmholtz coil system for the ALBA magnetic measurements laboratory, Barcelona, 2019.
(7) ***https://www.comsol.com/.
Downloads
Published
Issue
Section
License
Copyright (c) 2023 ELECTRIC MACHINES, MATERIALS AND DRIVES — PRESENT AND TRENDS
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
