ANALYSE D'UN CONVERTISSEUR CC-CC NON ISOLÉ À GAIN DE TENSION QUADRATIQUE AMÉLIORÉ

Auteur/ices

  • MURALI DURAISAMY Département d'EEE, Collège gouvernemental d'ingénierie de Srirangam, Tiruchirappalli, Inde. Author
  • VIDHARSHAN MURALI Département d'EEE, Sona College of Technology, Salem, Inde. Author

DOI :

https://doi.org/10.59277/RRST-EE.2026.4.9

Mots-clés :

Courant continu dans l'inductance, Convertisseur de puissance CC-CC, Rapport cyclique, Montage d'un prototype de convertisseur, Gain en tension quadratique, Réduction des contraintes de tension sur les commutateurs, Comportement en régime permanent

Résumé

Parmi les différentes sources d'énergie renouvelables, l'énergie solaire photovoltaïque (PV) présente des avantages tels qu'une pollution environnementale réduite par rapport aux méthodes conventionnelles utilisant des combustibles fossiles, sa disponibilité et l'abondance de l'énergie solaire. Les panneaux photovoltaïques produisent de l'électricité uniquement à une tension de sortie continue faible. Un champ photovoltaïque connecté à un bus CC basse tension ne peut pas alimenter directement des charges CC haute tension. Un convertisseur électronique de puissance CC-CC à haut gain est donc nécessaire pour augmenter la tension de sortie des panneaux photovoltaïques. Les convertisseurs CC-CC élévateurs non isolés classiques ne peuvent atteindre des tensions de sortie CC plus élevées qu'avec des rapports cycliques élevés. Cet article propose un convertisseur CC-CC à inductance continue non isolé, fonctionnant en mode courant, capable de fournir un gain de tension quadratique élevé à faible rapport cyclique. La topologie proposée comporte moins de composants passifs et semi-conducteurs et réduit les contraintes de tension sur les commutateurs de puissance actifs. Le comportement du convertisseur en régime permanent est étudié. Un prototype de convertisseur a été construit et testé en laboratoire afin de valider ses performances à un rapport cyclique de 0,6.

Références

(1) H.A. Mosallam, “A systematic review of DC-DC converter technologies: traditional, bidirectional, and impedance-source topologies,” Discover Electronics, 3, 16, pp. 1–65 (2026).

(2) X. Wu, J. Wang, Y. Zhang, J. Du, Z. Liu, Y. Chen, “Review of DC-DC converter topologies based on impedance network with wide input voltage range and high gain for fuel cell vehicles,” Automotive Innovation, 4, pp. 351–372 (2021).

(3) P. Anbarasu, N.K. Loganathan, A. Narendran, K. Rameshkumar, “Metaheuristic-driven dual inductor boost converter for floating PV systems in MATLAB/Simulink,” Rev. Roum. Sci. Techn. – Électrotechn. et Énerg., 71, 1, pp. 103–108 (2026).

(4) N.B. Dişken, M.M. Savrun, “High-gain multi-port DC-DC converter topologies for renewable energy applications: a comprehensive review,” Electric Power Components and Systems, 52, 8, pp. 1459–1473 (2024).

(5) S.A. Gorji, A. Mostaan, H.T. My, M. Ektesabi, “Non-isolated buck-boost DC-DC converter with quadratic voltage gain ratio,” IET Power Electronics, 12, 6, pp. 1425–1433 (2019).

(6) T. Nivetha, V. Lavanya, P. Sriramalakshmi, “Review of DC-DC boost converter derived topologies for renewable energy applications,” International Journal of Power Electronics and Drive Systems, 15, 2, pp. 947–957 (2024).

(7) D. Murali, “Analysis and experimental validation of a non-isolated DC-DC SEPIC-modified CUK combined converter,” Rev. Roum. Sci. Techn. – Électrotechn. et Énerg., 70, 3, pp. 367–372 (2025).

(8) S. Coelho, V. Monteiro, J.L. Afonso, “Topological advances in isolated DC-DC converters: high-efficiency design for renewable energy integration,” Sustainability, 17, pp. 1–40 (2025).

(9) Y. Supriya, J.S. Rajashekar, “A comprehensive review of various isolated DC-DC converter topologies associated with photovoltaic applications,” Recent Advances in Electrical and Electronic Engineering, 15, 8, pp. 595–606 (2022).

(10) P.K. Maroti, S. Padmanaban, J.B.H. Nielsen, M.S. Bhaskar, M. Meraj, A. Iqbal, “A new structure of high-voltage-gain SEPIC converter for renewable energy applications,” IEEE Access, 7, pp. 89857–89868 (2019).

(11) G. Guerin, G.A. Rincon-Mora, “Switched-inductor DC-DC converters: direct small-signal equivalent AC circuit,” Electronics, 15, 5, pp. 1–18 (2026).

(12) P. Biswal, V.V.S.K. Bhajana, A. Iqbal, V. Kakani, M. Popuri, “Extended high gain DC-DC converter with switched-inductors, switched-capacitors and soft-switching: analysis and implementation,” IET Power Electronics, 17, 11, pp. 1445–1456 (2024).

(13) M. Kalarathi, J. Gnanavadivel, K. Jayanthi, “High-boost DC-DC converter based on switched inductor, switched capacitor and voltage multiplier cell,” Iranian Journal of Science and Technology, Transactions of Electrical Engineering, 48, pp. 965–978 (2024).

(14) M.E. Azizkandi, F. Sedaghati, H. Shayeghi, F. Blaabjerg, “A high-voltage DC-DC converter based on a three-winding coupled inductor and voltage multiplier cell,” IEEE Transactions on Power Electronics, 35, 5, pp. 4558–4567 (2020).

(15) A. Alzahrani, M. Ferdowsi, P. Shamsi, “A family of scalable non-isolated interleaved DC-DC boost converters with voltage multiplier cells,” IEEE Access, 7, pp. 11707–11721 (2019).

(16) D. Murali, “A transformerless boost-modified CUK combined single-switch DC-DC converter topology with enhanced voltage gain,” Brazilian Archives of Biology and Technology, 66, 3, pp. 1–20 (2023).

(17) M. Karthikeyan, R. Elavarasu, P. Ramesh, C. Bharatiraja, P. Sanjeevikumar, L. Mihet-Popa, M. Mitolo, “A hybridization of CUK and boost converter using single switch with higher voltage gain capability,” Energies, 13, 9, pp. 1–24 (2020).

(18) D. Murali, “Closed-loop implementation of a non-isolated high step-up integrated SEPIC-CUK DC-DC converter structure with single switch,” Brazilian Archives of Biology and Technology, 67, 2, pp. 1–15 (2024).

(19) K.A. Mahafzah, M.A. Obeidat, A. Mansour, E.R. Sanseverino, G. Zizzo, “A new smart grid hybrid DC-DC converter with improved voltage gain and synchronized multiple outputs,” Applied Sciences, 14, 6, pp. 1–18 (2024).

(20) S. Ranganathan, A.N.D. Mohan, “Formulation and analysis of single-switch high-gain hybrid DC-to-DC converter for high-power applications,” Electronics, 10, 19, pp. 1–14 (2021).

(21) L. Díaz-Saldierna, J. Morales-Saldaña, M. Ortiz-López, “Switching regulator using a quadratic boost converter for wide DC conversion ratios,” IET Power Electronics, 2, 5, pp. 605–613 (2009).

(22) N. Subhani, Z. May, M.K. Alam, S. Mamun, “An enhanced gain non-isolated quadratic boost DC-DC converter with continuous source current,” PLoS ONE, 18, 12, pp. 1–25 (2023).

(23) J. Gnanavadivel, M. Kalarathi, K. Prakash, “A double-switch integrated high-gain quadratic boost converter for electric vehicle applications,” Rev. Roum. Sci. Techn. – Électrotechn. et Énerg., 70, 4, pp. 495–500 (2025).

(24) A.B. Reddy, S.N. Mahato, N. Tewari, “Dual-switch ultra-high-gain DC-DC converter with low-voltage stress,” International Journal of Electronics and Communication (AEU), 173, pp. 1–11 (2024).

(25) S. Bhavani, A. Sivaprakasam, “Sliding mode controlled closed-loop quadratic boost converter three-phase inverter system-fed permanent synchronous motor drive with enhanced response,” Rev. Roum. Sci. Techn. – Électrotechn. et Énerg., 70, 3, pp. 331–336 (2025).

(26) R. Rostami, S.H. Hosseini, M.B.B. Sharifian, “High-gain non-isolated step-up DC-DC converter proper for renewable energy applications,” Scientific Reports, 15, 1, pp. 1–24 (2025).

(27) S. Radhakrishnan, M. Veerasamy, “Modified multi-stage quadratic DC-DC converter with voltage multiplier for solar PV applications,” International Journal of Electronics, 113, 6, pp. 1145-1168 (2026).

(28) N. Dizangian, S. Jovanović, P. Poure, “Modeling and experimental verification of a single-switch quadratic boost DC-DC converter with high voltage gain for energy harvesting,” Energies, 18, 20, pp. 1–31 (2025).

(29) B. Babaiahgari, J.E. Valdez-Resendiz, A.A. Reyes, J.C. Rosas-Caro, E.D. Silva-Vera, “Quadratic boost converter with reduced input current ripple,” Applied Sciences, 15, 19, pp. 1–20 (2025).

(30) K. Jayanthi, S. Narthana, J. Gnanavadivel, “A single-switch non-isolated quadratic high-gain configuration for renewable energy applications,” Rev. Roum. Sci. Techn. – Électrotechn. et Énerg., 71, 1, pp. 97–102 (2026).

(31) J.L. Ramos, R.M. Varona, M.G.O. Lopez, L.H. Díaz-Saldierna, D.L. Cordoba, “Control strategy of a quadratic boost converter with voltage multiplier cell for high-voltage gain,” IEEE Journal of Emerging and Selected Topics in Power Electronics, 5, 4, pp. 1761–1770 (2017).

(32) J. Ahmad, M. Zaid, A. Sarwar, C.H. Lin, M. Asim, R.K. Yadav, M. Tariq, K. Satpathi, B. Alamri, “A new high-gain DC-DC converter with continuous input current for microgrid applications,” Energies, 14, 9, pp. 1–14 (2021).

Téléchargements

Publiée

2026-11-20

Numéro

Rubrique

Électronique et transmission de l’information | Electronics & Information Technology

Comment citer

DURAISAMY, M., & MURALI, V. (2026). ANALYSE D’UN CONVERTISSEUR CC-CC NON ISOLÉ À GAIN DE TENSION QUADRATIQUE AMÉLIORÉ. REVUE ROUMAINE DES SCIENCES TECHNIQUES — SÉRIE ÉLECTROTECHNIQUE ET ÉNERGÉTIQUE, 71(4), 531-536. https://doi.org/10.59277/RRST-EE.2026.4.9