IDENTIFICATION OF SEPARATELY EXCITED DC MOTOR PARAMETERS USING AN AUTOMATED PÁSEK METHOD
DOI :
https://doi.org/10.59277/RRST-EE.2026.4.4Mots-clés :
Parameter identification, Separately excited DC machine, Graphical Pasek method, Automated Pasek methodRésumé
This article addresses the identification of the parameters of a separately excited DC machine using the Pasek method, which has been modified to make the identification procedure fully automated. Pasek proposed an experimental procedure followed by an identification process that enables the determination, from a single test, of five parameters of a separately excited DC machine under certain simplifying assumptions. The Pasek method significantly reduces the time required for parameter identification; however, it includes a graphical step that requires human intervention and may be subject to measurement errors. In this article, we propose an automated approach that eliminates the graphical step by replacing it with computer-based data processing, thereby further reducing the identification time and making the overall procedure fully automated. The proposed procedure is experimentally implemented, and its results are compared with those of the classical identification method.
Références
(1) M. Kuczmann, “Review of DC motor modeling and linear control: theory with laboratory tests,” Electronics, 13, 11, Art. no. 2225 (2024).
(2) R. Belal, M. Flitti, M.L. Zegai, “Tuning of PI speed controller in direct torque control of dual star induction motor based on genetic algorithms and neuro-fuzzy schemes,” Rev. Roum. Sci. Techn. – Électrotechn. et Énerg., 69, 1, pp. 9–14 (2024).
(3) D.I. Völlmecke, “Parameter identification of DC motors,” Technical report, IMC Berlin (2013).
(4) M.F. Fazdi, P.-W. Hsueh, “Parameter identification of a permanent magnet DC motor: a review,” Electronics, 12, 12, Art. no. 2559 (2023).
(5) S.S. Saab, R. Abi Kaed-Bey, “Parameter identification of a DC motor: an experimental approach,” Proc. 8th IEEE Int. Conf. Electronics, Circuits and Systems (ICECS), 2, pp. 981–984 (2001).
(6) G.Á. Szíki, A. Szántó, É. Csernusné Ádámkó, “Review of methods for determining the moment of inertia and friction torque of electric motors,” Acta Polytech. Hung., 21, 4, pp. 203–218 (2024).
(7) C.O. Gökçe, M.E. İpek, M. Dayıoğlu, R. Ünal, “Parameter estimation and speed control of a real DC motor with a low-resolution encoder,” Results Control Optim., 19, Art. no. 100549 (2025).
(8) R. Majdoubi, L. Masmoudi, M. Bakhti, A. Elharif, B. Jabri, “Parameter estimation of BLDC motor based on physical approach and weighted recursive least squares algorithm,” Int. J. Electrical and Computer Engineering, 11, 1, pp. 133–145 (2021).
(9) M. Hadef, M.R. Mekideche, “Parameter identification of a separately excited DC motor via inverse problem methodology,” Turkish J. Electr. Eng. Comput. Sci., 17, 2, pp. 99–106 (2009).
(10) J.A. Cardona Soto, I.U. Ponce, I. Soto, M.A. García, G. Mejía, “Identification of dynamic parameters in a DC motor using step and ramp torque response methods,” Sensors, 26, 1, Art. no. 78 (2025).
(11) N. Khac Tung, S.M. Vlasov, “Algorithm for identification of DC motor parameters by method of dynamic expansion of regressor and mixing,” J. Sci. Tech. Inf. Technol., Mech. Opt., 21, 1, pp. 130–134 (2021).
(12) A. Sebhi, A.C. Megherbi, A. Dendouga, A. Zitouni, “Identification of DC motor parameters using the ZOA metaheuristic algorithm with comparative study,” J. Electr. Eng. Renew. Energy Dev., 1, 1, pp. 1–8 (2025).
(13) K.H. Chao, K.H. Huang, Y.H. Guo, “Design of a brushless DC motor drive system controller integrating the Zebra Optimization Algorithm and sliding mode theory,” Electronics, 14, 17, Art. no. 3353 (2025).
(14) J.C. Gamazo-Real, V. Martínez-Martínez, J. Gomez-Gil, “ANN-based position and speed sensorless estimation for BLDC motors,” Measurement, 188, Art. no. 110602 (2022).
(15) M. Raissi, P. Perdikaris, G.E. Karniadakis, “Physics-informed neural networks: a deep learning framework for solving forward and inverse problems involving nonlinear partial differential equations,” J. Comput. Phys., 378, pp. 686–707 (2019).
(16) J. Stiasny, G.S. Misyris, S. Chatzivasileiadis, “Physics-informed neural networks for non-linear system identification for power system dynamics,” Proc. 2021 IEEE Madrid PowerTech, Madrid, Spain, pp. 1–6 (2021).
(17) S. Ayankoso, P. Olejnik, “Time-series machine learning techniques for modeling and identification of mechatronic systems with friction: a review and real application,” Electronics, 12, 17, Art. no. 3669 (2023).
(18) Z. Pásek, “Nový způsob určení základních dynamických parametrů stejnosměrného motoru” [“A new method for determining the basic dynamic parameters of a DC motor”] (in Czech), Elektrotechnický Obzor, 51, pp. 109–114. https://fliphtml5.com/xgdg/ihme/Elektrotechnick%C3%BD_obzor_1958_-_1969/ (1962).
(19) H.A. Toliyat, G.B. Kliman, “Handbook of electric motors,” 2nd ed., CRC Press (2018).
(20) K.J. Åström, T. Hägglund, “Advanced PID control,” ISA – The Instrumentation, Systems, and Automation Society. https://www.semanticscholar.org/paper/Advanced-PID-Control-%C3%85str%C3%B6m-Hagglund/be4405ec46a026a6f602a260765d794a55f0b951 (2006).
(21) J.G. Ziegler, N.B. Nichols, “Optimum settings for automatic controllers,” Trans. ASME, 64, 8, pp. 759–765 (1942).
(22) A. Batool, N. ul Ain, A.A. Amin, M. Adnan, M.H. Shahbaz, “A comparative study of DC servo motor parameter estimation using various techniques,” Automatika, 63, 2, pp. 303–312 (2022).
(23) S.P. Perumalsamy, V. Narayanasamy, K.P. Arunachalam, P. Balasubramanian, “Evaluation for thermal analysis of DC motors in electric vehicles,” Rev. Roum. Sci. Techn. – Électrotechn. et Énerg., 71, 1, pp. 151–156 (2026).
(24) M.M. Rădulescu, A.A. Pop, “Experimental determination of linear dynamic model parameters of the separately excited brushed DC motor by modified Pásek’s method,” Rev. Roum. Sci. Techn. – Électrotechn. et Énerg., 67, 3, pp. 271–274 (2022).
(25) M.M. Rădulescu, “Transient processes in classical rotating electric machines I” (in Romanian), Casa Cărții de Știință (Science Book Publishing House), Cluj-Napoca, pp. 475–480 (2022).
(26) M. Jesenik, M. Ravber, M. Trbušić, “Innovative approach for the determination of a DC motor’s and drive’s parameters using evolutionary methods and different measured current and angular speed responses,” Mathematics, 12, 1, Art. no. 42 (2023).
Téléchargements
Publiée
Numéro
Rubrique
Licence
Certains droits réservés 2026 REVUE ROUMAINE DES SCIENCES TECHNIQUES — SÉRIE ÉLECTROTECHNIQUE ET ÉNERGÉTIQUE

Ce travail est disponible sous licence Creative Commons Attribution - Pas d'Utilisation Commerciale - Pas de Modification 4.0 International.