OPTIMISATION DE FLUX SANS MILIEU HESSIEN POUR LES ENTRAÎNEMENTS DE MOTEURS À INDUCTION ÉCONOMES EN ÉNERGIE : VALIDATION EXPÉRIMENTALE
DOI :
https://doi.org/10.59277/RRST-EE.2026.4.1Mots-clés :
Entraînements de moteurs à induction, Optimisation sans matrice hessienne, Commande vectorielle, Optimisation du rendementRésumé
La commande vectorielle (FOC) conventionnelle des moteurs à induction utilise généralement une référence de flux fixe, ce qui réduit l'efficacité énergétique, notamment à faible charge, en raison d'une excitation excessive et de pertes accrues. Pour pallier cette limitation, cet article propose une stratégie d'optimisation de flux adaptative, légère et sans matrice hessienne. Une loi de mise à jour en temps réel du courant d'axe d est développée, permettant de minimiser efficacement les pertes sans nécessiter de calcul de la dérivée seconde, d'optimisation itérative ni de matériel supplémentaire. En capturant le couplage non linéaire entre la demande de couple et l'excitation, la méthode ajuste dynamiquement le flux tout en préservant la structure FOC conventionnelle. Les résultats expérimentaux démontrent une amélioration significative de l'efficacité sur une large plage de fonctionnement, passant de 31,02 % à 61,87 % à faible charge et de 69,07 % à 77,61 % à charge nominale, par rapport à une commande FOC conventionnelle basée sur un régulateur PI. L'approche proposée offre une solution à faible complexité, adaptée aux applications industrielles en temps réel.
Références
(1) J. Holtz, “Sensorless control of induction motor drives”, Proc. IEEE, 90, 8, pp. 1359–1394 (2002).
(2) I.M. Mehedi, N. Saad, M.A. Magzoub, U.M. Al Saggaf, A.H. Milyani, “Simulation analysis and experimental evaluation of improved field-oriented controlled induction motors incorporating intelligent controllers”, IEEE Access, 10, pp. 18380–18394 (2022).
(3) M.G. Simões, “A concise history of induction motor drives—Part 1”, IEEE Electrification Magazine, 11, 2, pp. 5–11 (2023).
(4) T. Orłowska Kowalska, M. Korzonek, G. Tarchała, “Stability improvement methods of the adaptive full order observer for sensorless induction motor drive—Comparative study”, IEEE Trans. Ind. Inform., 15, 11, pp. 6114–6126 (2019).
(5) N.T. Pham, “A hybrid intelligent control framework with real-time validation for induction motor drives”, Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 71, 1, pp. 45–52 (2026).
(6) A.M. Bazzi, P.T. Krein, "Review of methods for real time loss minimization in induction machines”, IEEE Trans. Ind. Appl., 46, pp. 2319–2328 (2010).
(7) Z. Qu, M. Ranta, M. Hinkkanen, J. Luomi, “Loss-minimizing flux level control of induction motor drives”, IEEE Trans. Ind. Appl., 48, 3, pp. 952–961 (2012).
(8) M. Abdelwanis, R. El Sehiemy, “Efficient parameter estimation procedure using sunflower optimization algorithm for six phase induction motor”, Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 67, 3, pp. 259–264 (2022).
(9) R. Sivaraju, R. Dhanabal, P. Kumar, P. Vijayakumar, K. Jayakumar, “Improving the efficiency of induction motor drive by flux and torque control: A hybrid LSE RERNN approach”, ISA Transactions, 147, pp. 215–226 (2024).
(10) L. Wogi, M. Morawiec, T. Ayana, P. Kołodziejek, “Multiscalar control-based flux optimization for efficiency improvement of induction motor”, IEEE Trans. Transp. Electr., 11, 6, pp. 14047–14061 (2025).
(11) A. De Keyser, H. Vansompel, G. Crevecoeur, “Real-time energy-efficient actuation of induction motor drives using approximate dynamic programming”, IEEE Trans. Ind. Electron., 68, 12, pp. 11837–11846 (2021).
(12) R. Basak, A.K. Paul, “Cost-effective design of three-phase induction motor: An optimization approach”, Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 67, 4, pp. 461–466 (2022).
(13) M.S. Mousavi, S. Rezaei, A. Khayati, H. Oraee, “Predictive torque control of induction motor based on a robust integral sliding mode observer”, IEEE Trans. Ind. Electron., 70, 3, pp. 2339–2350 (2023).
(14) Y. Zhang, Z. Yin, R. Tang, J. Liu, “Moment of inertia and load torque identification based on adaptive extended Kalman filter for interior permanent magnet synchronous motors”, IEEE Trans. Instrum. Meas., 74, pp. 1–12 (2025).
(15) Y. El.-G. Boudissa, M. Bounekhla, F. Habbi, “Enhanced spiral dynamic algorithm with application to induction motor parameters identification”, Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 70, 4, pp. 441–448 (2026).
(16) I. Sami, S. Ullah, A. Basit, N. Ullah, J. Ro, “Integral super twisting sliding mode based sensorless predictive torque control of induction motor”, IEEE Access, 8, pp. 186740–186755 (2020).
(17) J. Martens, “Deep learning via Hessian free optimization”, Proc. Int. Conf. Mach. Learn., pp. 735–742 (2010).
(18) Y. Zhang, Y. Bai, H. Yang, B. Zhang, “Low switching frequency model predictive control of three level inverter fed IM drives with speed sensorless and field weakening operations”, IEEE Trans. Ind. Electron., 66, 6, pp. 4262–4272 (2019).
(19) Y. Zhang, L. Shao, Z. Yin, C. Bai, J. Liu, “Ultralocal model-based model predictive torque control of induction motor drives with model free speed controller”, IEEE Trans. Ind. Electron., 72, 9, pp. 8962–8973 (2025).
(20) N.I. Nahin, M.S. Kaiser, M.T. Arif, S. Shama, R. Ahmed, “Predictive torque control with reduced voltage vectors for voltage source inverter-driven induction motor drives”, IEEE Trans. Appl. Supercond., 34, 8, pp. 1–5 (2024).
(21) W. Xu, Y. Tang, D. Dong, X. Xiao, E.E.M. Rashad, A.K. Junejo, “Optimal reference primary flux-based model predictive control of linear induction machine with MTPA and field weakening operations for urban transit”, IEEE Trans. Ind. Appl., 58, 4, pp. 4708–4721 (2022).
(22) Y. Gong, X. Zhao, L. Wang, “Improved robust model predictive current control via high-order terminal sliding mode control for permanent magnet synchronous motor”, IEEE Trans. Autom. Sci. Eng., 23, pp. 5237–5249 (2026).
(23) I.D. De Martin, F. Tinazzi, M. Zigliotto, “Tuning less model predictive torque control for synchronous motor drives with maximum torque per ampere criterion including transients”, IEEE Trans. Power Electron., 40, 9, pp. 12393–12401 (2025).
(24) S. Zhang, R. Chen, W. Du, Y. Yuan, V.S. Vassiliadis, “Neural speed torque estimator for induction motors in the presence of measurement noise”, IEEE Trans. Ind. Electron., 70, 1, pp. 167–177 (2023).
(25) X. Guo, Q. Yang, Q. Wang, Y. Sun, A. Tan, “Electromagnetic torque modeling and validation for a permanent magnet spherical motor based on XGBoost”, Simulation Modeling Practice and Theory, 136, article 102989 (2024).
(26) N. Ali, W. Alam, M. Pervaiz, J. Iqbal, “Nonlinear adaptive backstepping control of permanent magnet synchronous motor," Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 66, 1, pp. 9–14 (2021).
(27) S. Zhang, R. Chen, W. Du, Y. Yuan, V.S. Vassiliadis, “A Hessian-free gradient flow method for the optimization of deep learning neural networks”, Comput. Chem. Eng., 141, article 107008 (2020).
(28) Z.-D. Zhou, G. Guo, R. Zhang, “Hessian free fixed /predefined time algorithms for distributed time-varying optimization”, IEEE Trans. Syst., Man, Cybern.: Syst., 55, 10, pp. 6890–6900 (2025).
(29) Y. He, P. Gong, Z. Lu, “Efficiency optimization strategy of induction motor based on electromagnetic and reactive torque control”, IEEE Trans. Transp. Electrific., 11, 6, pp. 13815–13825 (2025).
Téléchargements
Publiée
Numéro
Rubrique
Licence
Certains droits réservés 2026 REVUE ROUMAINE DES SCIENCES TECHNIQUES — SÉRIE ÉLECTROTECHNIQUE ET ÉNERGÉTIQUE

Ce travail est disponible sous licence Creative Commons Attribution - Pas d'Utilisation Commerciale - Pas de Modification 4.0 International.