ROBOTIC PERCEPTION OF SURFACE TEXTURE THROUGH PSYCHOPHYSICAL TACTILE MODELING

Authors

  • ABDUL ATTAYYAB KHAN Department of Electrical Engineering, Bahria University Karachi Campus,13th National Stadium Road, Karachi, Pakistan. Author
  • BASIT ALI Department of Electrical Engineering, Bahria University Karachi Campus,13th National Stadium Road, Karachi, Pakistan. Author
  • KANIZ FATIMA Department of Humanities and Social Sciences, Bahria University Karachi Campus,13th National Stadium Road, Karachi, Pakistan. Author

DOI:

https://doi.org/10.59277/RRST-EE.2026.4.14

Keywords:

Multiresolution sensation, Haptics, Tactile sensing, Robot perception, Low-power sensor

Abstract

This paper investigates the use of psychophysical principles for representing tactile information in robotic systems. Although tactile sensing and surface characterization have been extensively studied, representing tactile information from a psychophysical perspective remains an important research question. The work examines whether the sensation associated with rubbing an object can be represented in a robotic tactile system using principles of psychophysical evaluation. This work proposes a psychophysically motivated tactile representation that characterizes relative changes in tactile stimuli across multiple temporal-frequency scales. The tactile response is represented across multiple temporal-frequency bands, and its behavior under slowly varying multiplicative noise is analytically examined. Under the assumptions of the proposed formulation, the analysis indicates that such noise primarily affects the corresponding frequency scale. We evaluate the proposed representation using data from different tactile sensors and experimental platforms to assess its ability to discriminate between materials and surfaces. The proposed representation operates at an abstract perceptual level, aiming to reduce the influence of sensor-specific characteristics on tactile surface information.

References

(1) L.L. Thurstone, “Psychophysical analysis,” American Journal of Psychology, 38, 3, pp. 368–389 (1927).

(2) E. Weber, “Über den Tastsinn,” Archiv für Anatomie, Physiologie und Wissenschaftliche Medicin (Berlin), 1, pp. 152–159 (1835).

(3) G.T. Fechner, “Elemente der Psychophysik,” vol. 2, Breitkopf und Härtel, Leipzig (1860).

(4) G.E. Legge, “A power law for contrast discrimination,” Vision Research, 21, 4, pp. 457–467 (1981).

(5) E. Peli, “Contrast in complex images,” Journal of the Optical Society of America A, 7, 10, pp. 2032–2040 (1990).

(6) R. Riesz, “Differential intensity sensitivity of the ear for pure tones,” Physical Review, 31, 5, p. 867 (1928).

(7) W.J. McGill, “Neural counting mechanisms and energy detection in audition,” J. of Mathematical Psychology, 4, 3, pp. 351–376 (1967).

(8) A.B. Vallbo, R.S. Johansson, “Properties of cutaneous mechanoreceptors in the human hand related to touch sensation,” Human Neurobiology, 3, 1, pp. 3–14 (1984).

(9) M.A. Heller, W. Schiff, “Conclusions: The future of touch,” in The psychology of touch, Psychology Press, pp. 327–337 (2013), ISBN 0-8058-0750-0, ISBN 0-8058-0751-9.

(10) J. Chen, et al., “WLD: A robust local image descriptor,” IEEE Transactions on Pattern Analysis and Machine Intelligence, 32, 9, pp. 1705–1720 (2009).

(11) E. Gunther, S. O’Modhrain, “Cutaneous grooves: Composing for the sense of touch,” Journal of New Music Research, 32, 4, pp. 369–381 (2003).

(12) S. Feyzabadi, S. Straube, M. Folgheraiter, E.A. Kirchner, S.K. Kim, J.C. Albiez, “Human force discrimination during active arm motion for force feedback design,” IEEE Transactions on Haptics, 6, 3, pp. 309–319 (2013).

(13) D. Laming, “Sensory analysis,” Academic Press, London (1986).

(14) M.R. Cutkosky, R.D. Howe, W.R. Provancher, “Force and tactile sensors,” in Springer Handbook of Robotics, pp. 455–476 (2008).

(15) A.B. Alayat, H.A. Omar, “Pavement surface distress detection using digital image processing techniques,” J. Kejuruter, 35, 1, pp. 247–256 (2023).

(16) M. El Mesbahi, A. Tgarguifa, H. Hachimi, “Robot morphologies and communication strategies trade-off in a dynamic multi-robot collaborative environment,” Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 67, 2, pp. 193–198 (2022).

(17) W. Han, H. Qin, “A velocity self-learning algorithm for time-optimal trajectory planning along fully specified path – Part II,” Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 70, 2, p. 241 (2025).

(18) T. Othman, H.A. Rahman, J.A. Ghani, C.H.C. Haron, “Surface roughness in high-speed turning of alloy steel M303 using carbide tools in dry cutting condition,” J. Kejuruter., 34, 6, pp. 1169–1173 (2022).

(19) V. Maheshwari, R.F. Saraf, “High-resolution thin-film device to sense texture by touch,” Science, 312, 5779, pp. 1501–1504 (2006).

(20) J. Dargahi, S. Najarian, “Human tactile perception as a standard for artificial tactile sensing—a review,” International Journal of Medical Robotics and Computer Assisted Surgery, 1, 1, pp. 23–35 (2004).

(21) R.S. Dahiya, G. Metta, M. Valle, G. Sandini, “Tactile sensing—from humans to humanoids,” IEEE Transactions on Robotics, 26, 1, pp. 1–20 (2010).

(22) K.N. Brown, C.A. McMahon, J.H.S. Williams, “Features, aka the semantics of a formal language of manufacturing,” Research in Engineering Design, 7, 3, pp. 151–172 (2025).

(23) A.M. Okamura, M.R. Cutkosky, “Feature detection for haptic exploration with robotic fingers,” International Journal of Robotics Research, 20, 12, pp. 925–938 (2001).

(24) Y.-B. Jia, “Localization of curved parts through continual touch,” IEEE Transactions on Robotics, 21, 4, pp. 726–733 (2005).

(25) M. Shikida, T. Shimizu, K. Sato, K. Itoigawa, “Active tactile sensor for detecting contact force and hardness of an object,” Sensors and Actuators A: Physical, 103, 1–2, pp. 213–218 (2003).

(26) N. Gorges, S.E. Navarro, D. Göger, H. Wörn, “Haptic object recognition using passive joints and haptic key features,” in 2010 IEEE International Conference on Robotics and Automation (ICRA), IEEE, pp. 2349–2354 (2010).

(27) J. Bimbo, S. Luo, K. Althoefer, H. Liu, “In-hand object pose estimation using covariance-based tactile to geometry matching,” IEEE Robotics and Automation Letters, 1, 1, pp. 570–577 (2016).

(28) S. Luo, W.D. Mou, K. Althoefer, H. Liu, “Novel Tactile-SIFT descriptor for object shape recognition,” IEEE Sensors Journal, 15, 9, pp. 5001–5009 (2015).

(29) Z. Pezzementi, E. Plaku, C. Reyda, G.D. Hager, “Tactile-object recognition from appearance information,” IEEE Transactions on Robotics, 27, 3, pp. 473–487 (2011).

(30) J. Zhang, M. Marszalek, S. Lazebnik, C. Schmid, “Local features and kernels for classification of texture and object categories: A comprehensive study,” in 2006 IEEE Computer Society Conference on Computer Vision and Pattern Recognition – Workshops (CVPRW), IEEE, p. 121 (2006).

(31) N. Jamali, C. Sammut, “Majority voting: Material classification by tactile sensing using surface texture,” IEEE Transactions on Robotics, 27, 3, pp. 508–521 (2011).

(32) P. Dallaire, D. Emond, P. Giguere, B. Chaib-Draa, “Artificial tactile perception for surface identification using a triple axis accelerometer probe,” in 2011 IEEE International Symposium on Robotic and Sensors Environments (ROSE), IEEE, pp. 101–106 (2011).

(33) J.-L. Starck, J. Fadili, F. Murtagh, “The undecimated wavelet decomposition and its reconstruction,” IEEE Transactions on Image Processing, 16, 2, pp. 297–309 (2007).

(34) C. Weiss, H. Fröhlich, A. Zell, “Vibration-based terrain classification using support vector machines,” in 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), IEEE, pp. 1429–1434 (2006).

(35) M. Strese, J.-Y. Lee, C. Schuwerk, Q. Han, H.-G. Kim, E.G. Steinbach, “A haptic texture database for tool-mediated texture recognition and classification,” in 2014 IEEE International Symposium on Haptic, Audio and Visual Environments and Games (HAVE), IEEE, pp. 118–123 (2014).

(36) M. Strese, J.-Y. Lee, C. Schuwerk, Q. Han, H.-G. Kim, E.G. Steinbach, “A haptic texture database for tool-mediated texture recognition and classification,” in 2014 IEEE International Symposium on Haptic, Audio and Visual Environments and Games (HAVE), IEEE, pp. 118–123 (2014).

Published

20.11.2026

Issue

Section

Automatique et ordinateurs | Automation and Computer Sciences

How to Cite

ATTAYYAB KHAN, A., ALI, B., & FATIMA, K. (2026). ROBOTIC PERCEPTION OF SURFACE TEXTURE THROUGH PSYCHOPHYSICAL TACTILE MODELING. REVUE ROUMAINE DES SCIENCES TECHNIQUES — SÉRIE ÉLECTROTECHNIQUE ET ÉNERGÉTIQUE, 71(4), 561-566. https://doi.org/10.59277/RRST-EE.2026.4.14