PHYSICS-INFORMED NEURAL NETWORK-BASED SENSORLESS SPEED ESTIMATION OF BRUSHLESS DIRECT CURRENT MOTOR DRIVE

Authors

  • PRIYANKA SASIDHARAN SASTRA Deemed to Be University, Thirumalaisamudram, Thanjavur, Tamil Nadu 613401, India. Author
  • SRIRANJANI RAMAKRISHNAN SASTRA Deemed to Be University, Thirumalaisamudram, Thanjavur, Tamil Nadu 613401, India. Author
  • JAYALALITHA SUBBIAH SASTRA Deemed to Be University, Thirumalaisamudram, Thanjavur, Tamil Nadu 613401, India. Author

DOI:

https://doi.org/10.59277/RRST-EE.2026.4.5

Keywords:

Sensorless control, Brushless direct current (BLDC) motor, Extended Kalman filter, Electric vehicle, Physics-informed neural network (PINN)

Abstract

Brushless direct current (BLDC) motors are employed for electric vehicles (EVs), medical equipment, and military robots because of their fast dynamic speed response and wide range of speed regulation characteristics. However, conventional methods are not suitable for dynamic speed-varying conditions, which leads to parameter variation issues and longer computational time. Therefore, in this article, a novel Extended Kalman Filter (EKF) for sensorless speed detection of a BLDC motor is implemented using a machine learning-based physics-informed neural network (PINN) algorithm. Variables obtained from the PINN training are incorporated into the novel EKF; then, with the implemented model, the BLDC motor speed tracks the reference speed in dynamic, speed-varying conditions, thereby eliminating parameter variation issues and achieving shorter computational time as well. The implemented sensorless speed estimation scheme is compared with the conventional algorithms, and the results are presented using LAUNCHXL-F28379D. Also, compared with other conventional sensorless speed estimation techniques, the implemented method achieved reduced speed errors of 0.003% and 0.03% at 1500 rpm and 2000 rpm, respectively.

References

(1) H.M. CheshmehBeigi, “Design and implementation of the new sensorless rotor position estimation in homopolar salient pole brushless DC motor,” IEEE J. Emerg. Sel. Top. Power Electron., 10, 2, pp. 2020–2029 (2022).

(2) J.C. Gamazo Real, V. Martínez Martínez, J. Gomez Gil, “ANN based position and speed sensorless estimation for BLDC motors,” Measurement, 188, article 110602 (2022).

(3) C.L. Huang, C.J. Wu, S.C. Yang, “Full region sensorless BLDC drive for permanent magnet motor using pulse amplitude modulation with DC current sensing,” IEEE Trans. Ind. Electron., 68, 11, pp. 11234–11244 (2021).

(4) L. Yang, Z.Q. Zhu, H. Bin, Z. Zhang, L. Gong, “Virtual third harmonic back EMF based sensorless drive for high speed BLDC motors considering machine parameter asymmetries,” IEEE Trans. Ind. Appl., 57, 1, pp. 306–315 (2021).

(5) B. Saha, B. Singh, A. Sen, “SMO based position sensorless BLDC motor drive employing canonical switching cell converter for light electric vehicle,” IEEE Trans. Ind. Appl., 59, 3, pp. 2974–2984 (2023).

(6) S. Ok, Z. Xu, D.H. Lee, “A sensorless speed control of high speed BLDC motor using variable slope SMO,” IEEE Trans. Ind. Appl., 60, 2, pp. 3221–3228 (2024).

(7) D. Joshi, D. Deb, A.K. Giri, M. Elsisi, “Sensorless active disturbance rejection hybrid control with adaptive sliding mode observer for BLDC motor drives,” IEEE Trans. Power Electron., 40, 12, pp. 17832–17843 (2025).

(8) J. De Viaene, D. Ceulemans, S. Derammelaere, K. Stockman, “Sensorless load angle control for energy optimal sinusoidal driven BLDC motor applications,” IEEE/ASME Trans. Mechatronics, 27, 4, pp. 2290–2300 (2022).

(9) B. Saha, B. Singh, “Adaptive delay signal cancellation synchronous reference frame phase-locked loop-based position sensorless single-stage BLDC motor drive for light-duty electric vehicle,” IEEE Trans. Ind. Appl., 60, 2, pp. 3229–3236 (2024).

(10) B. Saha, B. Singh, “Sensorless BLDCM drive using an improved DSOGIPLL observer for solar PV assisted LEV,” IEEE Trans. Power Electron., 40, 1, pp. 1636–1644 (2025).

(11) M. Akrami, E. Jamshidpour, B. Nahid Mobarakeh, S. Pierfederici, V. Frick, “Sensorless control methods for BLDC motor drives: A review,” IEEE Trans. Transp. Electrific., 11, 1, pp. 135–152 (2025).

(12) P. Ramesh, A. Ranjeev, C. Santhakumar, J. Vinoth, C. Bharatiraja, “Sensorless field orientation control for brushless direct current motor controller for electric vehicles,” Mater. Today: Proc., 65, pp. 277–284 (2022).

(13) R. İnan, B. Aksoy, O.K.M. Salman, “Estimation performance of the novel hybrid estimator based on machine learning and extended Kalman filter proposed for speed sensorless direct torque control of brushless direct current motor,” Eng. Appl. Artif. Intell., 126, article 107083 (2023).

(14) P. Kumar, D.V. Bhaskar, U.R. Muduli, A.R. Beig, R.K. Behera, “Iron loss modeling with sensorless predictive control of PMBLDC motor drive for electric vehicle application,” IEEE Trans. Transp. Electrific., 7, 3, pp. 1506–1515 (2021).

(15) A. Sen, B. Singh, “Parametric observer controlled motor invariant electronic commutation of photovoltaic powered BLDCM without position sensor,” IEEE Trans. Power Electron., 38, 9, pp. 11304–11314 (2023).

(16) B. Saha, B. Singh, A. Sen, “Solar PV integration to e-rickshaw with regenerative braking and sensorless control,” IEEE Trans. Ind. Appl., 58, 6, pp. 7680–7691 (2022).

(17) A. Derbane, B. Tabbache, A. Ahrichea, “Fuzzy logic approach based direct torque control and five leg voltage source inverter for electric vehicle powertrain,” Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 66, 1, pp. 15–20 (2021).

(18) H. Lallouani, O. Moussa, A. Bouzidi, A. Akka, “Interval type 2 fuzzy logic control for brushless doubly fed induction generator based on wind energy conversion systems,” Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 70, 3, pp. 307–311 (2025).

(19) L. Popescu, O. Craiu, “Energy consumption analysis for an EV powertrain using three BLDC identical motors,” Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 68, 2, pp. 152–157 (2023).

(20) S.E. Chouaba, A. Barakat, “Dynamic de excitation performance of brushless synchronous machines using advanced control strategy,” Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 70, 4, pp. 501–506 (2025).

(21) M. Kavya, S. Jayalalitha, “A novel shift and search (S&S) algorithm for tracking maximum power in PV systems: An approach to increase efficiency,” Int. J. Precis. Eng. Manuf. Green Technol., 8, 6, pp. 1699–1710 (2021).

(22) R.M. Paruthipulli Kalarikkal, S. Jayalalitha, “Modified dual EKF with machine learning model for fouling prediction of industrial heat exchanger,” Korean J. Chem. Eng., 41, 4, pp. 1013–1027 (2024).

(23) R. Sriranjani, S. Jayalalitha, “Hardware-in-the-loop co-simulation of LMS algorithm for shunt active filter to mitigate harmonics and reactive power—Xilinx System Generator approach,” J. Control Eng. Appl. Inform., 21, 4, pp. 71–7 (2019), https://www.ceai.srait.ro/index.php/ceai/issue/view/321

Downloads

Published

20.11.2026

Issue

Section

Électrotechnique et électroénergétique | Electrical and Power Engineering

How to Cite

SASIDHARAN, P., RAMAKRISHNAN, S., & SUBBIAH, J. (2026). PHYSICS-INFORMED NEURAL NETWORK-BASED SENSORLESS SPEED ESTIMATION OF BRUSHLESS DIRECT CURRENT MOTOR DRIVE. REVUE ROUMAINE DES SCIENCES TECHNIQUES — SÉRIE ÉLECTROTECHNIQUE ET ÉNERGÉTIQUE, 71(4), 507-512. https://doi.org/10.59277/RRST-EE.2026.4.5