A COMPACT HIGH-GAIN SWITCHED-CAPACITOR CONVERTER FOR SUSTAINABLE ENERGY APPLICATIONS

Authors

  • JAYA CHRISTA SARGUNAR THOMAS Mepco Schlenk Engineering College, Sivakasi, Kariseri, Tamil Nadu 626005, India. Author
  • JAYANTHI KATHIRESAN Mepco Schlenk Engineering College, Sivakasi, Kariseri, Tamil Nadu 626005, India. Author
  • GNANAVADIVEL JOTHIMANI Mepco Schlenk Engineering College, Sivakasi, Kariseri, Tamil Nadu 626005, India. Author
  • MUTHU THIRUVENGADAM PERIYATHIRUVADI AAA College of Engineering & Technology, Sivakasi, Tamil Nadu 626005, India. Author

DOI:

https://doi.org/10.59277/RRST-EE.2026.4.10

Keywords:

High-gain power converter, Green energy sources, Active switched-capacitor network, Electric Vehicles, On-board chargers, Low-voltage battery packs

Abstract

This research emphasizes the design and realization of a converter with enhanced voltage gain with the objective of ensuring efficient power extraction from low-voltage battery systems and diverse renewable energy sources. An active switched-capacitor network converter with a lower part count and continuous input current is introduced in this study. This designed converter accomplishes a maximum voltage gain of 30 at a 0.8 duty cycle. The comprehensive theoretical analysis encompasses the converter’s design, critical performance metrics, and a detailed efficiency assessment incorporating extensive loss calculations.  A 100W hardware test bench for the designed converter showcases enhanced voltage gain with a stable 200 V on the higher potential side and a configurable 24V on the lower potential side. Moreover, the converter achieves a practical efficiency of 95% at rated load and exhibits robust performance under all tested source voltage and load-changing scenarios.

References

(1) A. Khaligh, M.D. Antonio, “Global trends in high-power on-board chargers for electric vehicles,” IEEE Transactions on Vehicular Technology, 68, 4, pp. 3306–3324 (2019).

(2) H. Salman, M.K. Muhammad, A. Farukh, T.F. Muhammad, E. Farheen, T. Houjan, “Contemporary trends in power electronic converters for charging solutions of electric vehicles,” CSEE Journal of Power and Energy Systems, 6, 4, pp. 911–929 (2020).

(3) D. Kumar, R.K. Nema, S.A. Gupta, “Comparative review on power conversion topologies and energy storage system for electric vehicles,” International Journal of Energy Research, 44, 10, pp. 7863–7885 (2020).

(4) H. Kuo-Ing, J. Wen-Zhuang, “Isolated step-up converter based on flyback converter and charge pumps,” IET Power Electronics, 7, 9, pp. 2250–2257 (2014).

(5) S. Ansari, M.J. Moghani, “A novel high voltage gain noncoupled inductor SEPIC converter,” IEEE Transactions on Industrial Electronics, 66, 9, pp. 7099–7108 (2018).

(6) M. Duraisamy, “Analysis and experimental validation of a non-isolated DC–DC SEPIC-modified Ćuk combined converter,” Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 70, 3, pp. 367–372 (2025).

(7) F.L. Tofoli, D. de Castro Pereira, W.J. de Paula, D. de Sousa Oliveira Júnior, “Survey on non-isolated high-voltage step-up DC–DC topologies based on the boost converter,” IET Power Electronics, 8, 10, pp. 2044–2057 (2015).

(8) L. Quin, L. Zhou, H. Waqas, J.L. Soon, M. Tian, J. Shen, “A family of transformer-less single-switch dual-inductor high voltage gain boost converters with reduced voltage and current stresses,” IEEE Transactions on Power Electronics, 36, 5, pp. 5674–5685 (2021).

(9) Y. Yuan-mao, E.C. Ka Wai, “Quadratic boost converter with low buffer capacitor stress,” IET Power Electronics, 7, 5, pp. 1162–1170 (2014).

(10) J.C. Rosas-Caro, J.E. Valdez-Resendiz, J.C. Mayo-Maldonado, A. Alejo Reyes, A. Valderrabano-Gonzalez, “Quadratic buck–boost converter with positive output voltage and minimum ripple point design,” IET Power Electronics, 11, 7, pp. 1306–1313 (2018).

(11) J. Gnanavadivel, M. Kalarathi, K. Prakash, “A double switch integrated high-gain quadratic boost converter for electric vehicle applications,” Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 70, 4, pp. 495–500 (2025).

(12) M. Forouzesh, Y. Siwakoti, S.A. Gorji, F. Blaabjerg, B. Lehman, “Step-up DC–DC converters, a comprehensive review of voltage-boosting techniques, topologies, and applications,” IEEE Transactions on Power Electronics, 32, 12, pp. 9143–9178 (2017).

(13) S.S.A. Antonio Manuel, K.F. Tiago Miguel, A.G. Ronaldo, “Single-switch high-efficiency hybrid boost-Ćuk DC/DC converter with high-voltage gain and low-voltage stress,” IET Power Electronics, 13, 12, pp. 2538–2546 (2020).

(14) M. Reza, A. Hossein, T. Abdolreza, “Design and implementation of a new SEPIC-based high step-up DC/DC converter for renewable energy applications,” IEEE Transactions on Industrial Electronics, 65, 2, pp. 1290–1297 (2018).

(15) L. Huawu, H. Haibing, W. Hongfei, X. Yan, B. Issa, “Overview of high-step-up coupled-inductor boost converters,” IEEE Journal of Emerging and Selected Topics in Power Electronics, 4, 2, pp. 689–704 (2016).

(16) H. Navid, S.F. Mohammadzadeh, E. Hamed, A.T. Poursheykh, “Voltage-lift technique in non-isolated boost DC–DC converters: An enhanced topology for high voltage gain applications,” Journal of Electrical Engineering, 76, 3, pp. 211–220 (2025).

(17) G. Sivaraj, P. Karpagavall, “Novel double switch voltage lift Ćuk converter,” Journal of Power Electronics, 23, 1, pp. 23–34 (2023).

(18) A. Ahmed, “Analysis of a symmetrical multilevel DC–DC boost converter with ripple reduction structure for solar PV systems,” Alexandria Engineering Journal, 61, 9, pp. 7055–7065 (2022).

(19) A. Javed, S.M. Daula, S. Adil, L.C. Hua, I. Atif, “A high gain noninverting DC–DC converter with low voltage stress for industrial applications,” International Journal of Circuit Theory and Applications, 49, 12, pp. 4212–4230 (2021).

(20) Y. Tang, T. Wang, H. Yaohua, “A switched-capacitor-based active-network converter with high voltage gain,” IEEE Transactions on Power Electronics, 29, 6, pp. 2959–2968 (2014).

(21) S.A. Antonio Manuel Santos, K.F. Tiago Miguel, A.G. Ronaldo, T. Ademir, “Hybrid high voltage gain transformerless DC–DC converter,” IEEE Transactions on Industrial Electronics, 69, 3, pp. 2470–2479 (2022).

(22) G. Yuanwei, C. Yanfeng, Z. Bo, Q. Dongyuan, X. Fan, “High step-up DC–DC converter with active switched LC-network for photovoltaic systems,” IEEE Transactions on Energy Conversion, 34, 1, pp. 321–329 (2019).

(23) M. Samiullah, A. Iqbal, I. Ashraf, P.K. Maroti, “Voltage lift switched inductor double leg converter with extended duty ratio for DC microgrid application,” IEEE Access, 9, pp. 85310–85325 (2021).

(24) T. Shanthi, S.U. Prabha, K. Sundaramoorthy, “Non-isolated n-stage high step-up DC–DC converter for low voltage DC source integration,” IEEE Transactions on Energy Conversion, 36, 3, pp. 1625–1634 (2021).

(25) S. Khan, M. Zaid, M.D. Siddique, A. Iqbal, “Ultra-high-gain step-up DC/DC converter based on switched inductor and improved voltage lift technique for high-voltage applications,” IET Power Electronics, 15, pp. 932–952 (2022).

(26) A.B. Reddy, S.N. Mahato, T. Nilanjan, “Dual switch ultra-high gain DC–DC converter with low voltage stress,” AEU – International Journal of Electronics and Communications, 173, article 154995 (2024).

(27) S. Shima, N. Al-Emadi, P.K. Maroti, I. Atif, “A new high gain active switched network-based boost converter for DC microgrid application,” IEEE Access, 9, pp. 68253–68265 (2021).

(28) K. Jayanthi, N. Senthil Kumar, J. Gnanavadivel, “Design and implementation of modified SEPIC high gain DC–DC converter for DC microgrid applications,” International Transactions on Electrical Energy Systems, 31, 8, pp. 1–18 (2021).

(29) L. Devarajan, S. Chellathurai, “Aquila optimized nonlinear control for DC–DC boost converter with constant power load,” Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 69, 4, pp. 419–424 (2024).

Downloads

Published

20.11.2026

Issue

Section

Électronique et transmission de l’information | Electronics & Information Technology

How to Cite

SARGUNAR THOMAS, J. C., KATHIRESAN, J., JOTHIMANI, G., & PERIYATHIRUVADI, M. T. (2026). A COMPACT HIGH-GAIN SWITCHED-CAPACITOR CONVERTER FOR SUSTAINABLE ENERGY APPLICATIONS. REVUE ROUMAINE DES SCIENCES TECHNIQUES — SÉRIE ÉLECTROTECHNIQUE ET ÉNERGÉTIQUE, 71(4), 537-542. https://doi.org/10.59277/RRST-EE.2026.4.10