DUAL POLARISED CORADIATOR MIMO ANTENNA FOR 5G APPLICATIONS
DOI:
https://doi.org/10.59277/RRST-EE.2026.4.11Keywords:
Ring with square inclusion, Stepped feed, Multiple input multiple output (MIMO), 5G mobile applicationsAbstract
Emerging communication systems require effective antenna infrastructure to support the quality of service needed for generation five (5G) mobile networks. A simple, compact, two-element MIMO antenna for future 5G applications is presented in this work. The antenna uses a ring patch with a square inclusion-shaped coradiator design, fed with a stepped microstrip line for 28 GHz operation. The dual orthogonal feeding of the coradiator configures it as a MIMO antenna. The bottom ground plane is altered to form a defected ground, which is further slotted to obtain the required performance. The compact structure of size 20.03x20.03x0.8 mm3 is fabricated on a very popular Rogers 3003 substrate. The antenna offers appropriate gain and antenna efficiency values of 6.3 dBi and 92%, with good diversity behavior, ECC<0.001, suitable for 5G mobile applications.
References
(1) R.R. Elsharkawy, K.F.A. Hussein, A.E. Farahat, “Circularly polarized 28-GHz antenna for next generations of communication systems,” Scientific Reports, 15, Art. no. 5745 (2025).
(2) P. Tiwari, M.K. Gaur, M. Kaushik, A. Shastri, B. Singh, V. Gahlaut, “Performance evaluation of wideband dual-port octagonal-shaped millimeter-wave MIMO antenna for satellite communication,” International Journal of RF and Microwave Computer-Aided Engineering, 2025, 14 pages, Art. no. 1456913 (2025).
(3) M.A. Rahman et al., “Metamaterial-based tri-band compact MIMO antenna system for 5G IoT applications with machine learning performance verification,” Scientific Reports, 15, Art. no. 22866 (2025).
(4) M. Soman, P. Kumar, M. Sharma, “Design and testing of a novel MIMO antenna for the 28 GHz millimeter wave band,” Journal of Information Systems Engineering and Management, 10, 53, pp. 164–179 (2025).
(5) W.T. Sethi et al., “Pattern diversity-based four-element dual-band MIMO patch antenna for 5G mm-wave communication networks,” Journal of Infrared, Millimeter, and Terahertz Waves, 45, pp. 521–537 (2024).
(6) D. Khan, A. Ahmad, D.Y. Choi, “Dual-band 5G MIMO antenna with enhanced coupling reduction using metamaterials,” Scientific Reports, 24, Art. no. 96 (2024).
(7) P. Kumar et al., “An ultra-compact 28 GHz arc-shaped millimeter-wave antenna for 5G application,” Micromachines, 14, 5 (2023).
(8) N.E. Nasri, M.E. Ghzaoui, M. Fattah, “A quad-port MIMO antenna with improved bandwidth and high gain for 38GHz 5G applications,” Franklin Open, 6, Art. no. 100078 (2024).
(9) Z. Wang, W. You, M. Yang, W. Nie, W. Mu, “Design of MIMO antenna with double L-shaped structure for 5G NR,” Symmetry, 15, 3 (2023).
(10) L. Malviya, S. Chouhan, “Multi-cut four-port shared radiator with stepped ground and diversity effects for WLAN application,” International Journal of Microwave and Wireless Technologies, 11, pp. 1044–1053 (2019).
(11) I.U. Din et al., “Frequency-selective surface-based MIMO antenna array for 5G millimeter-wave applications,” Sensors, 23, Art. no. 7009 (2023).
(12) P.R. Meher, S.K. Mishra, “Design and development of mathematical equivalent circuit model of broadband circularly polarized semi-annular ring-shaped monopole antenna,” Progress in Electromagnetics Research C, 129, pp. 73–87 (2023).
(13) M. Munde, A. Nandgaonkar, S.B. Deosarkar, “Dual feed wideband annular ring microstrip antenna with circular DGS for reduced SAR,” Progress in Electromagnetics Research B, 88, pp. 175–195 (2020).
(14) M.K. Khandelwal, B.K. Kanaujia, S. Kumar, “Defected ground structure: fundamentals, analysis, and applications in modern wireless trends,” International Journal of Antennas and Propagation, 2017, 22 pages, Art. no. 2018527 (2017).
(15) P. Jha, A. Kumar, N. Sharma, “A metamaterial-inspired split-ring resonator accomplished multiband antenna for 5G and other wireless applications,” Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 68, 2, pp. 127–131 (2023).
(16) R.N. Tiwari, D. Sharma, P. Singh, P. Kumar, “A flexible dual-band 4 × 4 MIMO antenna for 5G mm-wave 28/38 GHz wearable applications,” Scientific Reports, 14, Art. no. 14324 (2024).
(17) P. Ramesh et al., “Performance analysis of channel modeling for 5G networks,” in IEEE International Conference on Next Generation Electronics (2026).
(18) M.M. Basha, P. Pradeep, S. Gundala, J. Syed, “Design of compact and high-gain dual-band four-port MIMO antenna array for mm-wave 5G communications,” Results in Engineering, 25, Art. no. 104153 (2025).
(19) M. Sharma, B.R. Perli, L. Matta, T. Addepalli, K. Sharma, F.N. Sibai, “Flexible four-port MIMO antenna for 5G NR-FR2 tri-band mm-wave application with SAR analysis,” Scientific Reports, 14, Art. no. 29100 (2024).
(20) A.A. Megahed, E.H. Abdelhay, M. Abdelazim, H.Y.M. Soliman, “5G millimeter wave wideband MIMO antenna arrays with high isolation,” Journal of Wireless Communication Networks, 2023, 61 (2023).
(21) W.A.E. Ali, A.A. Ibrahim, A.E. Ahmed, “Dual-band millimeter wave 2 × 2 MIMO slot antenna with low mutual coupling for 5G networks,” Wireless Personal Communications, 129, pp. 2959–2976 (2023).
Downloads
Published
Issue
Section
License
Copyright (c) 2026 REVUE ROUMAINE DES SCIENCES TECHNIQUES — SÉRIE ÉLECTROTECHNIQUE ET ÉNERGÉTIQUE

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.