UNE FONCTION GAUSSIENNE MODIFIÉE POUR LA MODÉLISATION DE L'HYSTÉRÈSE MAGNÉTIQUE EN CONDITIONS DYNAMIQUES

Auteurs

  • MOURAD DAFRI Département de génie électrique, Faculté d'ingénierie, Université Badji Mokhtari, BP 12 Sidi Amar, Annaba 23000, Algérie. , Laboratoire de Génie Électrique (LGEG),Université 8 Mai 1945 Guelma, BP. 401, Guelma, Algérie. Author https://orcid.org/0000-0002-6472-7175 (non authentifié)
  • MOURAD NAIDJI Laboratoire de génie électrique (LGE), Département de génie électrique, Université de M'Sila, B.P. 166 Ichebilia, M'Sila 28000, Algérie. Author
  • ABDELAZIZ LADJIMI Laboratoire de Génie Électrique (LGEG),Université 8 Mai 1945 Guelma, BP. 401, Guelma, Algeria. Author
  • WAFA TOURAB TOURAB Electrical Engineering Department, Faculty of Engineering, Badji Mokhtari University, BP 12 Sidi Amar, Annaba 23000, Algeria. Author
  • ABDELHAMID KSENTINI KSENTINI Electrical Engineering Department, Faculty of Engineering, Badji Mokhtari University, BP 12 Sidi Amar, Annaba 23000, Algeria. Author

DOI :

https://doi.org/10.59277/RRST-EE.2026.2.15

Mots-clés :

Modèle de Preisach ; hystérésis magnétique, Distribution gaussienne modifiée, Optimisation par essaim de particules (PSO), NiFe₂O₄, Effets dynamiques, Fréquence, Température

Résumé

Cet article présente une nouvelle distribution gaussienne modifiée pour le modèle de Preisach afin d'améliorer la modélisation de l'hystérésis magnétique. Contrairement aux distributions classiques, l'approche proposée intègre des paramètres supplémentaires, ce qui permet une représentation plus précise de la dispersion des seuils de commutation des relais élémentaires. L'influence de chaque paramètre sur la forme du cycle d'hystérésis est analysée en détail. Les paramètres du modèle sont identifiés par la méthode d'optimisation par essaim de particules (PSO), à partir de données expérimentales. Les résultats de la simulation sont ensuite comparés à des mesures expérimentales effectuées sur une ferrite NiFe₂O₄, en tenant compte des effets dynamiques liés à la température et à la fréquence. Les résultats montrent que le modèle proposé présente une bonne concordance entre la simulation et l'expérience, notamment pour la largeur et la pente des cycles d'hystérésis.

Biographie de l'auteur

  • MOURAD DAFRI, Département de génie électrique, Faculté d'ingénierie, Université Badji Mokhtari, BP 12 Sidi Amar, Annaba 23000, Algérie., Laboratoire de Génie Électrique (LGEG),Université 8 Mai 1945 Guelma, BP. 401, Guelma, Algérie.

    Mourad Dafri is a Senior Lecturer (Class B) in the Department of Electrical Engineering, Faculty of Engineering, at Badji Mokhtar University, Annaba, Algeria. He received his M.Sc. degree in Electrical Engineering from Badji Mokhtar University in 2016 and his Doctorate degree in Electrical Engineering from the University of 8 May 1945, Guelma, Algeria, in 2021. He is currently a member of the LGEG Laboratory. His research interests include the characterization and modeling of magnetic losses in magnetic materials, magnetic hysteresis models, and electrical power quality.

Références

(1) M.N. Benallal, A. Mahieddine, C.K. Khelil, A. Mazouz, Use of the BH curves approximation for the calculation of magnetic circuits in electrical machines, Rev. Roum. Sci. Techn. – Électrotechn. et Énerg., 68, 1, pp. 42–45 (2023).

(2) S. Gao, Y. Li, H. Zhang, J. Tian, A decoupled magnetic integration technique for dual-frequency topologies, Rev. Roum. Sci. Techn. – Électrotechn. et Énerg., 69, 2, pp. 153–158 (2024).

(3) O. Craiu, T.-I. Ichim, Comparison of two bi-phase hybrid stepper motors, one with a solid and the other with a laminated stator, Rev. Roum. Sci. Techn. – Électrotechn. et Énerg., 70, 2, pp. 181–186 (2025).

(4) T. Tudorache, Finite element analysis of a flexible dual-speed salient pole synchronous machine, Rev. Roum. Sci. Techn. – Électrotechn. et Énerg., 70, 1, pp. 21–26 (2025).

(5) O. Toudert, F. Auger, A. Houari, M. Laghrouche, Novel rotor position extraction based on rotating high-frequency voltage injection for permanent magnet synchronous machine drives at low or zero speeds, Rev. Roum. Sci. Techn. – Électrotechn. et Énerg., 68, 2, pp. 188–193 (2023).

(6) I.D. Mayergoyz, Mathematical models of hysteresis, Elsevier, pp. 1–300 (2003).

(7) I.D. Mayergoyz, Mathematical models of hysteresis and their applications, IEEE Trans. Power Systems, pp. 1–10 (1992).

(8) Y. Bernar, E. Mendes, Z. Ren, A new method for the determination of the parameters in Preisach model, CEFC'98, Tucson, Arizona, USA, pp. 1–6 (1998).

(9) S. Clénet, F. Piriou, Identification de la fonction d'Everett pour le modèle de Preisach, MGE 2000, Lille, France, pp. 71–74 (2000).

(10) G. Bertotti, V. Basso, Considerations on the physical interpretation of the Preisach model of ferromagnetic hysteresis, Journal of Applied Physics, pp. 1–10 (1993).

(11) P. Pruksanubal, A. Binner, K.H. Gonschorek, Modeling of magnetic hysteresis using Cauchy distribution, 3rd International Symposium on Electromagnetic Compatibility, pp. 446–449 (2002).

(12) Y.O. Amor, M. Féliachi, Présentation d'une fonction de Lorentz modifiée pour une modélisation de l'hystérésis magnétique, Colloque MGE 2000 sur les matériaux du génie électrique, Lille, France, pp. 1–6 (2000).

(13) M. Dafri, A. Lajimi, S. Mendaci, A. Babouri, Modeling of magnetic hysteresis using Student distribution, J. Supercond. Nov. Magn., pp. 1–10 (2020).

(14) F. Delincé, Modélisation des régimes transitoires dans les systèmes comportant des matériaux magnétiques non linéaires et hystérétiques, Ph.D. dissertation, Faculté des Sciences Appliquées de Liège, pp. 1–200 (1994).

(15) G. Bertotti, Dynamic generalization of the scalar Preisach model of hysteresis, IEEE Transactions on Magnetics, 28, 5, pp. 2599–2601 (1992).

(16) Y. Bernard, E. Mendes, F. Bouillault, Dynamic hysteresis modeling based on Preisach model, IEEE Transactions on Magnetics, 38, 2, pp. 885–888 (2002).

(17) A. Ladjimi, M. Dafri, S. Fisli, Phenomenological model of the frequency-dependent hysteresis of ferrite NiFe₂O₄, Rev. Roum. Sci. Techn. – Électrotechn. et Énerg., 67, 3, pp. 275–279 (2022).

(18) A. Ladjimi, A. Babouri, Modeling of frequency effects in a Jiles-Atherton magnetic hysteresis model, Rev. Roum. Sci. Techn. – Électrotechn. et Énerg., 61, pp. 217–220 (2016).

(19) S.H. Ould Ouali, H. Mohelleb, R. Chaîbi, M. Féliachi, Introduction de l'effet de la température dans le modèle de Preisach pour la génération des cycles d'hystérésis, J. Phys. IV France, 124, pp. 315–320 (2005).

(20) H. Chen, Q. Xu, Y. Xiang, Y. Huang, Temperature characteristics modeling of Preisach theory, MATEC Web of Conferences, 139, pp. 1–6 (2017).

(21) T. Monnor, K. Kanchiang, R. Yimnirun, Y. Laosiritaworn, Preisach modeling on temperature-dependent mean-field Ising-hysteresis, Ferroelectrics, 459, 1, pp. 128–133 (2014).

(22) M. Dafri, A. Ladjimi, S. Mendaci, A. Babouri, Phenomenological model of the temperature dependence of hysteresis based on the Preisach model, J. Supercond. Nov. Magn., 34, pp. 1453–1458 (2021).

(23) H. Zhang, Q. Yang, C. Zhang, Y. Li, Y. Chen, Temperature-dependent hysteresis model based on temporal convolutional network, AIP Advances, 14, 2, pp. 1–10 (2024).

(24) R. Eberhart, J. Kennedy, A new optimizer using particle swarm theory, MHS'95. Proceedings of the Sixth International Symposium on Micro Machine and Human Science, Nagoya, Japan, pp. 39–43 (1995).

(25) L. Chen, Q. Yi, T. Ben, Z. Zhang, Y. Wang, Parameter identification of Preisach model based on velocity-controlled particle swarm optimization method, AIP Advances, 11, pp. 1–10 (2021).

(26) F. Preisach, Über die magnetische Nachwirkung, Zeitschrift für Physik, pp. 1–10 (1935).

(27) R. Marion, R. Scorretti, N. Siauve, M. Raulet, L. Krahenbuhl, Identification of Jiles–Atherton model parameters using particle swarm optimization, IEEE Transactions on Magnetics, 44, 6, pp. 894–897 (2008)..

Téléchargements

Publiée

2026-06-02

Numéro

Rubrique

Électrotechnique et électroénergétique | Electrical and Power Engineering

Comment citer

UNE FONCTION GAUSSIENNE MODIFIÉE POUR LA MODÉLISATION DE L’HYSTÉRÈSE MAGNÉTIQUE EN CONDITIONS DYNAMIQUES. (2026). REVUE ROUMAINE DES SCIENCES TECHNIQUES — SÉRIE ÉLECTROTECHNIQUE ET ÉNERGÉTIQUE, 71(2), 259-264. https://doi.org/10.59277/RRST-EE.2026.2.15