PERFORMANCE ENHANCEMENT STRATEGY FOR VOLTAGE SOURCE INVERTERS USING W-TYPE CARRIER FUNCTION
DOI:
https://doi.org/10.59277/RRST-EE.2026.4.8Keywords:
Pulse width modulation (PWM), Modified carrier PWM, W-type carrier, Voltage source inverter, Field-programmable gate array (FPGA)Abstract
A new pulse-width modulation (PWM) switching approach has been introduced by modifying the carrier waveform, aiming to overcome the limitations of conventional methods for generating the fundamental component within the linear modulation range. This innovative technique is specifically designed for use in voltage-source inverters. Its effectiveness is evaluated by analyzing key performance metrics, such as the fundamental output voltage and Total Harmonic Distortion (THD), across a wide operating range. Extensive simulations study has confirmed that the proposed PWM method offers notable performance improvements over traditional schemes.
References
(1) M. Mahbub, “Comparative analysis of five different PWM techniques on three-phase voltage source inverter-fed induction motor drive,” 2021 2nd International Conference on Robotics, Electrical and Signal Processing Techniques (ICREST), Dhaka, Bangladesh, pp. 6–11 (2021).
(2) Y. Shen, Y. Zhang, Z. Yin, G. Yuan, D. Xiao, H. Zhao, “Enhancing low carrier ratio induction motors with pulse pattern control for peak-to-peak torque ripple optimization,” IEEE Trans. Transp. Electr., 11, 5, pp. 12236–12252 (2025).
(3) J.S. Artal Sevil, R. Dufo López, J. L. Bernal Agustín, “Analysis of different PWM modulation techniques: comparison and design,” 2018 XIII Technologies Applied to Electronics Teaching Conference (TAEE), La Laguna, Spain, pp. 1–8 (2018).
(4) G. M. Gupta, S. Mondal, A. I. Maswood, “Model predictive control strategy of grid-tied converter control in weak grid conditions for containerized microgrid (CMG) systems,” 2022 IEEE PES Innovative Smart Grid Technologies – Asia (ISGT Asia), Singapore, Singapore, pp. 364–368 (2022).
(5) H. Le Huy, K. Slimani, P. Viarouge, “Analysis and implementation of a real-time predictive current controller for permanent magnet synchronous servo drives,” IEEE Trans. Ind. Electron., 41, 1, pp. 110–117 (1994).
(6) N. Gupta, S. Kumar, J. K. Saini, “Review of inverter control algorithms in grid-integrated solar photovoltaic system,” 2020 Second International Sustainability and Resilience Conference: Technology and Innovation in Building Designs (51154), Sakheer, Bahrain, pp. 1–6 (2020).
(7) H. B. Gobburi, V. B. Borghate, P. M. Meshram, “Discontinuous pulse width modulation techniques for modular multilevel converter,” 2020 IEEE International Students’ Conference on Electrical, Electronics and Computer Science (SCEECS), Bhopal, India, pp. 1–6 (2020).
(8) H. Khan, E. Miliani, K. Drissi, “Evolutive discontinuous SVM for variable speed electric drive,” Proceedings of the 2011 14th European Conference on Power Electronics and Applications, Birmingham, UK, pp. 1–7 (2011).
(9) H. Jafari, D. Nazarpour, S. Golshannavaz, E. Babaei, “Design and analysis of a new hybrid three-phase multilevel inverter with improved specifications,” 2021 29th Iranian Conference on Electrical Engineering (ICEE), Tehran, Iran, Islamic Republic of, pp. 258–262 (2021).
(10) H. Jariwala, N. Shah, “Optimized modulation technique for cascaded H-bridge multilevel inverter,” 2021 Innovations in Power and Advanced Computing Technologies (i PACT), Kuala Lumpur, Malaysia, pp. 1–6 (2021).
(11) A. Routray, R. K. Singh, R. Mahanty, “Harmonic reduction in hybrid cascaded multilevel inverter using modified grey wolf optimization,” IEEE Trans. Ind. Appl., 56, 2, pp. 1827–1838 (2020).
(12) X. Zhao, D. Jiang, J. Chen, Z. Shen, Q. Li, “Leakage current suppression with capacitor voltage control of three-level flying capacitor grid-connected inverters,” IEEE Trans. Ind. Electron., 69, 3, pp. 2191–2201 (2022).
(13) M. Fukaya, T. Soeda, H. Haga, “A hybrid carrier-less dual inverter using a linear amplifier and a T-type inverter,” 2025 Energy Conversion Congress & Expo Europe (ECCE Europe), Birmingham, United Kingdom, pp. 1–6 (2025).
(14) P. Mishra, A. Banerjee, M. Ghosh, “FPGA-based real-time implementation of quad-pole duty digital PWM-controlled permanent magnet BLDC drive,” IEEE/ASME Trans. Mechatronics, 25, 3, pp. 1456–1467 (2020).
(15) P. Lakshmanan, P. A. Janakiraman, S. K. Ram, A. Abhishek, “FPGA-based digital control implementation of unbalance compensation in three-phase, three-wire stand-alone inverters,” 2022 IEEE 10th Power India International Conference (PIICON), New Delhi, India, pp. 1–5 (2022).
(16) L. U. Sudha, J. Baskaran, S. A. Elankurisil, “FPGA techniques based new hybrid modulation strategies for voltage source inverters,” The Scientific World Journal, article 490151 (2015).
(17) S. Thamizharasan, L. U. Sudha, J. Baskaran, S. Ramkumar, S. Jeevananthan, “Carrierless pulse width modulation strategy for multilevel inverters,” IET Power Electron., 8, pp. 2034–2043 (2015).
(18) S. Thamizharasan, J. Baskaran, S. Ramkumar, S. Jeevananthan, “Cross-switched multilevel inverter using auxiliary reverse-connected voltage sources,” IET Power Electron., 7, pp. 1519–1526 (2014).
(19) S. Thamizharasan, C. Krishnakumar, “Performance investigations of novel PWM control strategies for fundamental fortification in single-phase matrix converter for cyclo conversion operation and FPGA implementations,” Electric Power Components and Systems, 49, 18–19, pp. 1475–1488 (2022).
(20) J. Thankaswamy, M. Paramasivan, M. Rathinam, U. Meenakshi Sundaram, “Chaotic randomized space vector pulse width modulation intended for induction motor drives in industrial applications: SVPWM for industrial motor drives,” Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 69, 4, pp. 401–406 (2024).
(21) A. Boudouda, A. Aibeche, A. Bouzida, N. Boudjerda, “A randomized carrier-based discontinuous pulse width modulation strategy for neutral point clamped three-level inverter,” Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 69, 3, pp. 329–334 (2024).
(22) S. Chennai, “Novel shunt active power filter based on nine-level NPC inverter using MC LSPWM modulation strategy,” Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 69, 1, pp. 21–26 (2024).
(23) M. Kaouane, M. Deroueche, N. Cherrat, A. Boukhelifa, “Study and design of a digital pulse width modulation signal generator for DC–DC converters,” Rev. Roum. Sci. Techn. – Électrotechn. Et Énerg., 71, 1, pp. 115–120 (2026).
Downloads
Published
Issue
Section
License
Copyright (c) 2026 REVUE ROUMAINE DES SCIENCES TECHNIQUES — SÉRIE ÉLECTROTECHNIQUE ET ÉNERGÉTIQUE

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.