MOTORUL EV CU CONCEPȚIE ASISTĂTĂ DE CALCULATOR
DOI:
https://doi.org/10.36801/Cuvinte cheie:
Vehicul electric (EV), Simulare, Grup motopropulsor electric, Acţionări electrice, Metodologia asistată de calculator, Metodologia de instruireRezumat
Una dintre cele mai simple moduri de a obține rapid principalele caracteristici ale unui grup motopropulsor EV (Electric Vehicle) este prin calcularea valorilor solicitate din forțele rezistente care acționează asupra vehiculului. Un grup motopropulsor care acoperă zona de operare a vehiculului poate oferi satisfacție. Autonomia este sustinuta de sursa de energie de la bord (bateria), iar performantele maxime de viteza si acceleratie provin din posibilitatea de a stabili si mentine un curent maxim prin baterie, electronica de putere si motor electric. În acest context, lucrarea de față se concentrează pe o posibilă metodologie realizată folosind o concepție asistată de computer. După determinarea caracteristicilor fiecărei componente ale grupului de propulsie folosind calcule și simulări, comportamentul EV este analizat sub o simulare completă a grupului de propulsie.
Referințe
(1) L. Popescu, "Electromobility topics entering a new decade", in Electric machines, materials and drives present and trends (SME 2020), APME, vol. 16, No. 1, pp. 131–140, ian. 2021, doi: 10.36801/apme.2020.1.13.
(2) John G. Hayes, G. Abas Goodarzi, Electric Powertrain: Energy Systems, Power Electronics and Drives for Hybrid, Electric and Fuel Cell Vehicles, 2018 John Wiley & Sons Ltd., doi:10.1002/9781119063681.
(3) L. Popescu, L. Dumitran and A. Stanescu, "Multi-motor solutions for electric vehicles," 2021 International Conference on Applied and Theoretical Electricity (ICATE), 2021, pp. 1-6, doi: 10.1109/ICATE49685.2021.9465016.
(4) J. Hayes, G. Goodarzi, Electric Powertrain: Energy Systems, Power Electronics and Drives for Hybrid, Electric and Fuel Cell Vehicles, 2018 John Wiley & Sons Ltd., doi:10.1002/9781119063681.
(5) H. Sridharan, S. Ramalingam, A. Jawahar, “Wide Boost Ratio in Quasi-impedance Network Converter using Switch Voltage Spike Reduction Technique”, rrst-ee, vol. 68, no. 3, pp. 259–265, oct. 2023, doi: 10.59277/rrst-ee.2023.3.2.
(6) A. Duirasamy, V. Thiyagarajan, “A Novel Fault-tolerant Generalized Symmetrical Topology for Renewable Energy and Electric Vehicle Applications”, RRST-EE, vol. 69, no. 4, pp. 383–388, Nov. 2024, doi: 10.59277/RRST-EE.2024.69.4.3.
(7) D. Roy, M. Singh, “Realization of a Three-level Neutral Point Clamped Inverter Using a Novel Region Selection Approach of Bus Clamping PWM for Electric Vehicle Application”, RRST-EE, vol. 68, no. 2, pp. 139–145, Jul. 2023, doi: 10.59277/RRST-EE.2023.68.2.4.
(8) T. Roubache, S. Chaouch, “Nonlinear Fault Tolerant Control of Dual Three-phase Induction Machines Based Electric Vehicles”, RRST-EE, vol. 68, no. 1, pp. 65–70, Apr. 2023, doi: 10.59277/RRST-EE.2023.68.1.11.
(9) Haitham Abu-Rub, Atif Iqbal, Jaroslaw Guzinski, High Performance Control of AC Drives with MATLAB®/Simulink, 2021 Jo,hn Wiley & Sons Ltd., doi:10.1002/9781119591313.
(1) L. Popescu, L. Melcescu, L. Dumitran, A. Crăciunescu and A. Stanescu, "Control analysis of a bi-motor electric traction system for energy and performance optimization", International Scientific Conference on Communications, Information, Electronic and Energy Systems (CIEES), 2021, AIP Conference Proceedings 2570, 040002 (2022), doi:10.1063/5.0099663.
(1) N. Mohan, S. Raju, Analysis and Control of Electric Drives: Simulations and Laboratory Implementation, 2021 John Wiley & Sons, Inc., DOI:10.1002/9781119584575.
(12) C.L. Popescu, L.M. Dumitran, A. Stănescu " Simulation of Multi-Motor Propulsion System for Energy Efficiency in Electric Vehicles" in Annals of the University of Craiova, Electrical Engineering series, No. 45, Issue 1, 2021, published the 21st of January 2022; pp 75-82; ISSN 1842-4805, doi: 10.52846/AUCEE.2021.1.11.
(13) K. T. Chau, Electric Vehicle Machines and Drives: Design, Analysis and Application, 2015 John Wiley & Sons, Singapore Pte. Ltd., doi:10.1002/9781118752555.
(14) L. Popescu, O. Craiu, "Energy Consumption Analysis for an EV Powertrain using Three BLDC Identical Motors", Rev. Roum. Sci. Techn.– Électrotechn. et Énerg. Vol. 68, No. 2, pp. 152–157, Bucarest, 2023,doi: 10.59277/RRST-EE.2023.68.2.6.
(15) L. Popescu, A. Crăciunescu, O. Craiu, "Analysis of the Wheel Steering Influence on Energy Consumption of an EV PMSM In-wheel Propulsion System", in: L. Moldovan, A. Gligor (eds), The 17th International Conference Interdisciplinarity in Engineering. Inter-ENG 2023. Lecture Notes in Networks and Systems, vol 929, PP 236-255, Springer, Cham. doi: 10.1007/978-3-031-54674-7_19
(16) L. Popescu, L. Melcescu and O. Craiu, "Energy Efficiency Improvement for an Electric Vehicle PM BLDC Propulsion System Using Phase Advance and Dwell Control," 2022 International Conference on Electrical, Computer, Communications and Mechatronics Engineering (ICECCME), 2022, pp. 1-6, doi: 10.1109/ICECCME55909.2022.9988388.
(17) L. Popescu, L. Melcescu, O. Craiu, A. Craciunescu and V. Bostan, "Phase Advance and Dwell Control Applied to a PM BLDC Motor for Increasing the Maximum Speed of an Electric Vehicle," 2022 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 2022, pp. 850-855, doi: 10.1109/SPEEDAM53979.2022.9841974.
(18) L. Popescu, A. Stănescu, "Efficiency maps for an EV BLDC motor using analytic calculation and simulation", in Electric machines, materials and drives present and trends (SME 2022), APME, vol. 18, No. 1, pp. 89-99, March. 2023, doi: 10.36801/apme.2022.1.11.
(19) L. Popescu, O. Craiu and L. Melcescu, "Analyzing the Torque Transfer between Two In-Wheel Motors of an Electric Vehicle," 2023 13th International Symposium on Advanced Topics in Electrical Engineering (ATEE), Bucharest, Romania, 2023, pp. 1-6, doi: 10.1109/ATEE58038.2023.10108365.
(20) H. Nagar et al., "Powertrain Sizing and Performance Evaluation for Battery Electric Vehicle Using Model Based Design," 2021 Innovations in Power and Advanced Computing Technologies (i-PACT), Kuala Lumpur, Malaysia, 2021, pp. 1-6, doi: 10.1109/i-PACT52855.2021.9696602.
(21) L. Popescu, A. Stănescu, Şt. Vasiliu, "Electric vehicle performance analysis using multi-motor propulsion system", in Electric machines, materials and drives present and trends (SME 2023), APME, vol. 19, No. 1, pp. 74-83, Feb. 2024, doi: 10.36801/apme.2023.1.10
(22) L. Popescu, A. Stănescu, Şt. Vasiliu, "Didactical platform for multi-motor solutions," in Electrical Machines, Materials and Drives Present and Trends, 17(1), APME, Vol. 17 No. 1 (2021), pp. 172–180, doi: 10.36801/apme.2021.1.17.
(23) L. Popescu, "Educational platforms with different types of motors for the study of electric propulsion systems", in Electric machines, materials and drives present and trends (SME 2023), APME, vol. 19, No. 1, pp. 109–118, Feb. 2024, doi: 10.36801/apme.2023.1.14.
Descărcări
Publicat
Număr
Secțiune
Licență
Copyright (c) 2025 ACTUALITĂŢI ŞI PERSPECTIVE ÎN DOMENIUL MAŞINILOR ELECTRICE
TAceastă lucrare este licențiată în temeiul Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
